Hi, I filed a bug report regarding a missing card ID for VX900 for over 2 years ago.. downloaded the driver today (source from git) and the ID is still missing!? The manufacturer is Igel Technoligies, and the device is an Igel UD5 Thin Client, any chance we can get this ID in the source for further releases? See old mail conversations below for more info.
Regrds, Kaveh 2014-10-15 12:34 GMT+02:00 Kaveh Hoodeh <[email protected]>: > Hi again, > > This is where im standing now, I have recompiled the driver with the > following line added via_id.c: > {"Igel UD5 Series", VIA_VX900, 0x101B, 0x1305, > VIA_DEVICE_CRT}, > > Im getting a bit further with the start of X.. actually it starts now > compared to before when it just died with errors, however, im still not > getting any video output! > > When X starts the screen goes black, and after a few second the monitor goes > into power saving mode. ..so far i haven't been able to wake it back up when > this happens! Even if i kill X with Ctrl+Alt+Backspace the screen wont turn > back on (I have been able to verify that im actually back in the console adn > that X is dead since i am able to type commands which will return beeps from > the PC-speaker) > > ..I have included a new Xorg.log from when i run X with the patched > openchrome and also my xorg.conf if it might help you to digg further into > this issue. > > Thanks for your input so far, regards > > /Kaveh > > 2014-10-14 9:54 GMT+02:00 Kaveh Hoodeh <[email protected]>: >> >> Hi Xavier, >> >> The board is from a thin client, an Igel UD5, orginaly designed for >> windows 7 embeded. >> Here is the datasheet: >> https://www.igel.com/fileadmin/user/upload/documents/PDF_files/Datasheets_EN/H710C_IGEL_manual_2011-09-28_01.pdf >> >> I have the screen connected on the DVI, and have also therefor the option >> "ActiveDevice" set to "DFP" in xorg.conf. >> >> I will try the included patch later and get back to you. >> >> Regards, >> Kaveh >> >> >> 2014-10-14 9:34 GMT+02:00 Xavier Bachelot <[email protected]>: >>> >>> On 12/10/2014 14:38, Kaveh Hoodeh wrote: >>>> >>>> Hi Guys, >>>> >>>> I cant get my graphics to work with the openchrome driver even though im >>>> using a VX900.. see attached Xorg.log >>>> >>>> I will be very grateful for any suggestions that might solve this issue >>>> for me. =) >>>> >>>> Thanks & cheers, >>>> >>>> /Kaveh >>>> >>> Hi Kaveh, >>> >>> What is the board's manufacturer and model ? >>> What are the available outputs (VGA, DVI, etc...) ? >>> >>> Please try the attached patch, it may help with your issue, but I'll need >>> the answers to the questions above before pushing it. >>> >>> Regards, >>> Xavier >>> >>> >> > _______________________________________________ Openchrome-users mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/openchrome-users Main page: http://www.openchrome.org Wiki: http://www.openchrome.org/trac/wiki/TOC
