Without xorg.conf it is the same result. Monitor has not signal. logs:
[ 15.739] X.Org X Server 1.12.3 Release Date: 2012-07-09 [ 15.739] X Protocol Version 11, Revision 0 [ 15.739] Build Operating System: Linux 3.4.4-3-ARCH i686 [ 15.739] Current Operating System: Linux recepce 3.0.38-1-lts #1 SMP PREEMPT Fri Jul 20 06:30:55 UTC 2012 i686 [ 15.740] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=75fda088-c708-4274-b182-532e50add9e3 ro quiet [ 15.740] Build Date: 09 July 2012 04:03:16PM [ 15.740] [ 15.740] Current version of pixman: 0.26.2 [ 15.740] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 15.740] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 15.741] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 2 00:41:07 2012 [ 15.780] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 15.812] (==) No Layout section. Using the first Screen section. [ 15.812] (==) No screen section available. Using defaults. [ 15.812] (**) |-->Screen "Default Screen Section" (0) [ 15.812] (**) | |-->Monitor "<default monitor>" [ 15.821] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 15.821] (==) Automatically adding devices [ 15.821] (==) Automatically enabling devices [ 15.884] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 15.884] Entry deleted from font path. [ 15.884] (WW) The directory "/usr/share/fonts/Type1/" does not exist. [ 15.884] Entry deleted from font path. [ 15.911] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ [ 15.911] (==) ModulePath set to "/usr/lib/xorg/modules" [ 15.911] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 15.911] (II) Loader magic: 0x82235a0 [ 15.911] (II) Module ABI versions: [ 15.911] X.Org ANSI C Emulation: 0.4 [ 15.911] X.Org Video Driver: 12.0 [ 15.911] X.Org XInput driver : 16.0 [ 15.911] X.Org Server Extension : 6.0 [ 15.915] (--) PCI:*(0:1:0:0) 1106:3344:1462:7104 rev 1, Mem @ 0xf0000000/67108864, 0xfb000000/16777216, BIOS @ 0x????????/65536 [ 15.915] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 15.915] (II) LoadModule: "extmod" [ 15.919] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 15.948] (II) Module extmod: vendor="X.Org Foundation" [ 15.948] compiled for 1.12.3, module version = 1.0.0 [ 15.948] Module class: X.Org Server Extension [ 15.948] ABI class: X.Org Server Extension, version 6.0 [ 15.948] (II) Loading extension MIT-SCREEN-SAVER [ 15.948] (II) Loading extension XFree86-VidModeExtension [ 15.948] (II) Loading extension XFree86-DGA [ 15.948] (II) Loading extension DPMS [ 15.948] (II) Loading extension XVideo [ 15.948] (II) Loading extension XVideo-MotionCompensation [ 15.948] (II) Loading extension X-Resource [ 15.948] (II) LoadModule: "dbe" [ 15.949] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 15.963] (II) Module dbe: vendor="X.Org Foundation" [ 15.963] compiled for 1.12.3, module version = 1.0.0 [ 15.964] Module class: X.Org Server Extension [ 15.964] ABI class: X.Org Server Extension, version 6.0 [ 15.964] (II) Loading extension DOUBLE-BUFFER [ 15.964] (II) LoadModule: "glx" [ 15.964] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 15.990] (II) Module glx: vendor="X.Org Foundation" [ 15.990] compiled for 1.12.3, module version = 1.0.0 [ 15.990] ABI class: X.Org Server Extension, version 6.0 [ 15.990] (==) AIGLX enabled [ 15.991] (II) Loading extension GLX [ 15.991] (II) LoadModule: "record" [ 15.991] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 15.992] (II) Module record: vendor="X.Org Foundation" [ 15.993] compiled for 1.12.3, module version = 1.13.0 [ 15.993] Module class: X.Org Server Extension [ 15.993] ABI class: X.Org Server Extension, version 6.0 [ 15.993] (II) Loading extension RECORD [ 15.993] (II) LoadModule: "dri" [ 15.993] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 16.004] (II) Module dri: vendor="X.Org Foundation" [ 16.004] compiled for 1.12.3, module version = 1.0.0 [ 16.004] ABI class: X.Org Server Extension, version 6.0 [ 16.004] (II) Loading extension XFree86-DRI [ 16.004] (II) LoadModule: "dri2" [ 16.004] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 16.006] (II) Module dri2: vendor="X.Org Foundation" [ 16.006] compiled for 1.12.3, module version = 1.2.0 [ 16.006] ABI class: X.Org Server Extension, version 6.0 [ 16.006] (II) Loading extension DRI2 [ 16.006] (==) Matched openchrome as autoconfigured driver 0 [ 16.006] (==) Matched vesa as autoconfigured driver 1 [ 16.006] (==) Matched fbdev as autoconfigured driver 2 [ 16.006] (==) Assigned the driver to the xf86ConfigLayout [ 16.006] (II) LoadModule: "openchrome" [ 16.062] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so [ 16.099] (II) Module openchrome: vendor="http://openchrome.org/"; [ 16.100] compiled for 1.12.3, module version = 0.3.0 [ 16.100] Module class: X.Org Video Driver [ 16.100] ABI class: X.Org Video Driver, version 12.0 [ 16.100] (II) LoadModule: "vesa" [ 16.101] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 16.118] (II) Module vesa: vendor="X.Org Foundation" [ 16.118] compiled for 1.12.3, module version = 2.3.2 [ 16.118] Module class: X.Org Video Driver [ 16.118] ABI class: X.Org Video Driver, version 12.0 [ 16.118] (II) LoadModule: "fbdev" [ 16.119] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 16.125] (II) Module fbdev: vendor="X.Org Foundation" [ 16.125] compiled for 1.12.2, module version = 0.4.3 [ 16.125] Module class: X.Org Video Driver [ 16.125] ABI class: X.Org Video Driver, version 12.0 [ 16.125] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, KM400/KN400, K8M800/K8N800, PM800/PM880/CN400, VM800/P4M800Pro/VN800/CN700, CX700/VX700, K8M890/K8N890, P4M890, P4M900/VN896/CN896, VX800/VX820, VX855/VX875, VX900 [ 16.125] (II) VESA: driver for VESA chipsets: vesa [ 16.125] (II) FBDEV: driver for framebuffer: fbdev [ 16.126] (++) using VT number 7 [ 16.172] (!!) VIA Technologies does not support this driver in any way. [ 16.172] (!!) For support, please refer to http://www.openchrome.org/. [ 16.172] (!!) (openchrome 0.3.0 release) [ 16.172] (WW) Falling back to old probe method for vesa [ 16.172] (WW) Falling back to old probe method for fbdev [ 16.172] (II) Loading sub module "fbdevhw" [ 16.172] (II) LoadModule: "fbdevhw" [ 16.173] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 16.179] (II) Module fbdevhw: vendor="X.Org Foundation" [ 16.179] compiled for 1.12.3, module version = 0.0.2 [ 16.179] ABI class: X.Org Video Driver, version 12.0 [ 16.179] (II) CHROME(0): VIAPreInit [ 16.179] (II) CHROME(0): VIAGetRec [ 16.180] (--) CHROME(0): Chipset: VM800/P4M800Pro/VN800/CN700 [ 16.180] (--) CHROME(0): Chipset revision: 0 [ 16.180] drmOpenDevice: node name is /dev/dri/card0 [ 16.284] drmOpenByBusid: Searching for BusID pci:0000:01:00.0 [ 16.285] drmOpenDevice: node name is /dev/dri/card0 [ 16.285] drmOpenDevice: open result is 9, (OK) [ 16.285] drmOpenByBusid: drmOpenMinor returns 9 [ 16.285] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 [ 16.286] (II) [drm] KMS not enabled [ 16.286] (II) CHROME(0): [drm] via interface version: 2.11.1 [ 16.286] (II) CHROME(0): DRI 1 api supported [ 16.296] (II) Loading sub module "vgahw" [ 16.297] (II) LoadModule: "vgahw" [ 16.297] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 16.299] (II) Module vgahw: vendor="X.Org Foundation" [ 16.299] compiled for 1.12.3, module version = 0.1.0 [ 16.299] ABI class: X.Org Video Driver, version 12.0 [ 16.299] (--) CHROME(0): Probed amount of VideoRAM = 65536 kB [ 16.299] (II) CHROME(0): VIAMapMMIO [ 16.300] (--) CHROME(0): mapping MMIO @ 0xfb000000 with size 0xd000 [ 16.300] (--) CHROME(0): mapping BitBlt MMIO @ 0xfb200000 with size 0x200000 [ 16.301] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 [ 16.301] (II) CHROME(0): VIAMapFB [ 16.301] (--) CHROME(0): mapping framebuffer @ 0xf0000000 with size 0x4000000 [ 16.315] (--) CHROME(0): Frame buffer start: 0xb2f29000, free start: 0x0 end: 0x4000000 [ 16.315] (II) CHROME(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 16.315] (==) CHROME(0): Depth 24, (--) framebuffer bpp 32 [ 16.315] (==) CHROME(0): RGB weight 888 [ 16.315] (==) CHROME(0): Default visual is TrueColor [ 16.315] (II) CHROME(0): VIASetupDefaultOptions - Setting up default chipset options. [ 16.316] (==) CHROME(0): Shadow framebuffer is disabled. [ 16.316] (==) CHROME(0): Hardware acceleration is enabled. [ 16.316] (==) CHROME(0): Using EXA acceleration architecture. [ 16.316] (==) CHROME(0): EXA composite acceleration disabled. [ 16.316] (==) CHROME(0): EXA scratch area size is 4096 kB. [ 16.316] (==) CHROME(0): Using hardware two-color cursors and software full-color cursors. [ 16.316] (==) CHROME(0): GPU virtual command queue will be enabled. [ 16.316] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled. [ 16.316] (==) CHROME(0): AGP DMA will be enabled if DRI is enabled. [ 16.316] (==) CHROME(0): AGP DMA will be used for 2D acceleration. [ 16.316] (==) CHROME(0): PCI DMA will be used for XV image transfer if DRI is enabled. [ 16.316] (==) CHROME(0): Will not enable VBE modes. [ 16.316] (==) CHROME(0): VBE VGA register save & restore will not be used if VBE modes are enabled. [ 16.316] (==) CHROME(0): Xv Bandwidth check is enabled. [ 16.316] (==) CHROME(0): Will not impose a limit on video RAM reserved for DRI. [ 16.316] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory. [ 16.316] (==) CHROME(0): TV dotCrawl is disabled. [ 16.317] (==) CHROME(0): TV deflicker is set to 0. [ 16.317] (==) CHROME(0): No default TV type is set. [ 16.317] (==) CHROME(0): No default TV output signal type is set. [ 16.317] (==) CHROME(0): No default TV output port is set. [ 16.317] (==) CHROME(0): Will not print VGA registers. [ 16.317] (==) CHROME(0): Will not scan I2C buses. [ 16.317] (II) CHROME(0): ...Finished parsing config file options. [ 16.317] (--) CHROME(0): Detected MSI PM8M-V. Card-Ids (1462|7104) [ 16.317] (II) CHROME(0): Detected MemClk 6 [ 16.317] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 6 [ 16.317] (II) CHROME(0): Detected TV standard: NTSC. [ 16.317] (II) Loading sub module "ramdac" [ 16.317] (II) LoadModule: "ramdac" [ 16.317] (II) Module "ramdac" already built-in [ 16.317] (II) Loading sub module "i2c" [ 16.318] (II) LoadModule: "i2c" [ 16.318] (II) Module "i2c" already built-in [ 16.318] (II) CHROME(0): ViaI2CInit [ 16.318] (II) CHROME(0): ViaI2CBus1Init [ 16.318] (II) CHROME(0): I2C bus "I2C bus 1" initialized. [ 16.318] (II) CHROME(0): ViaI2cBus2Init [ 16.318] (II) CHROME(0): I2C bus "I2C bus 2" initialized. [ 16.318] (II) CHROME(0): ViaI2CBus3Init [ 16.318] (II) CHROME(0): I2C bus "I2C bus 3" initialized. [ 16.318] (II) Loading sub module "ddc" [ 16.318] (II) LoadModule: "ddc" [ 16.318] (II) Module "ddc" already built-in [ 16.318] (II) CHROME(0): ViaOutputsDetect [ 16.319] (==) CHROME(0): LVDS-0 : Digital output bus width is 12 bits. [ 16.319] (==) CHROME(0): LVDS-0 : DVI Center is disabled. [ 16.319] (==) CHROME(0): LVDS Panel will not be forced. [ 16.319] (==) CHROME(0): Panel size is not selected from config file. [ 16.319] (II) CHROME(0): Output VGA-1 has no monitor section [ 16.320] (II) CHROME(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0. [ 16.323] (II) CHROME(0): ViaDisplayDisableCRT [ 16.323] (II) CHROME(0): EDID for output VGA-1 [ 16.323] (II) CHROME(0): Output VGA-1 disconnected [ 16.323] (WW) CHROME(0): No outputs definitely connected, trying again... [ 16.323] (II) CHROME(0): Output VGA-1 disconnected [ 16.323] (WW) CHROME(0): Unable to find connected outputs - setting 1024x768 initial framebuffer [ 16.324] (II) CHROME(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 16.324] (==) CHROME(0): DPI set to (96, 96) [ 16.324] (II) Loading sub module "fb" [ 16.324] (II) LoadModule: "fb" [ 16.351] (II) Loading /usr/lib/xorg/modules/libfb.so [ 16.366] (II) Module fb: vendor="X.Org Foundation" [ 16.366] compiled for 1.12.3, module version = 1.0.0 [ 16.366] ABI class: X.Org ANSI C Emulation, version 0.4 [ 16.366] (II) Loading sub module "exa" [ 16.367] (II) LoadModule: "exa" [ 16.367] (II) Loading /usr/lib/xorg/modules/libexa.so [ 16.398] (II) Module exa: vendor="X.Org Foundation" [ 16.398] compiled for 1.12.3, module version = 2.5.0 [ 16.398] ABI class: X.Org Video Driver, version 12.0 [ 16.398] (II) UnloadModule: "vesa" [ 16.399] (II) Unloading vesa [ 16.399] (II) UnloadModule: "fbdev" [ 16.399] (II) Unloading fbdev [ 16.399] (II) UnloadSubModule: "fbdevhw" [ 16.399] (II) Unloading fbdevhw [ 16.399] (--) Depth 24 pixmap format is 32 bpp [ 16.399] (II) CHROME(0): VIAScreenInit [ 16.400] drmOpenDevice: node name is /dev/dri/card0 [ 16.400] drmOpenDevice: open result is 9, (OK) [ 16.400] drmOpenDevice: node name is /dev/dri/card0 [ 16.400] drmOpenDevice: open result is 9, (OK) [ 16.400] drmOpenByBusid: Searching for BusID pci:0000:01:00.0 [ 16.400] drmOpenDevice: node name is /dev/dri/card0 [ 16.400] drmOpenDevice: open result is 9, (OK) [ 16.401] drmOpenByBusid: drmOpenMinor returns 9 [ 16.401] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 [ 16.401] (II) [drm] DRM interface version 1.4 [ 16.401] (II) [drm] DRM open master succeeded. [ 16.401] (II) CHROME(0): [drm] Using the DRM lock SAREA also for drawables. [ 16.401] (II) CHROME(0): [drm] framebuffer handle = 0xf0000000 [ 16.402] (II) CHROME(0): [drm] added 1 reserved context for kernel [ 16.402] (II) CHROME(0): X context handle = 0x1 [ 16.402] (II) CHROME(0): [drm] installed DRM signal handler [ 16.402] (II) CHROME(0): [dri] visual configs initialized. [ 16.402] (II) CHROME(0): [drm] register handle = 0xfb000000 [ 16.402] (II) CHROME(0): [drm] framebuffer handle = 0xf0000000 [ 16.403] (II) CHROME(0): [drm] mmio Registers = 0xfb000000 [ 16.403] (II) CHROME(0): [dri] mmio mapped. [ 16.403] (II) CHROME(0): DRI1 ScreenInit commplete [ 16.403] (II) CHROME(0): [drm] Detected AGP vendor 0x1106, device 0x0314 [ 16.403] (II) CHROME(0): [drm] Found AGP v3 compatible device. Trying AGP 8X mode. [ 16.403] (II) CHROME(0): [drm] Trying to enable AGP fast writes. [ 16.467] (II) CHROME(0): [drm] drmAgpEnabled succeeded [ 16.473] (II) CHROME(0): [drm] agpAddr = 0xf4000000 [ 16.473] (II) CHROME(0): [drm] agpSize = 0x01e00000 [ 16.473] (II) CHROME(0): [drm] agp physical addr = 0xb10ed000 [ 16.473] (II) CHROME(0): [dri] Using AGP. [ 16.473] (II) CHROME(0): [drm] Using 65536 KB for DRM memory heap. [ 16.473] (II) CHROME(0): [dri] Frame buffer initialized. [ 16.473] (II) CHROME(0): [dri] Kernel data initialized. [ 16.473] 3145728 bytes of DRI memory allocated at 0, handle 703552736 [ 16.473] 262144 bytes of DRI memory allocated at 300000, handle 4075772896 [ 16.474] 32 bytes of DRI memory allocated at 340000, handle 313481760 [ 16.474] 32 bytes of DRI memory allocated at 340020, handle 3685701920 [ 16.486] (II) CHROME(0): - Visuals set up [ 16.497] (II) CHROME(0): - B & W [ 16.499] (II) CHROME(0): [EXA] Disabling EXA accelerated composite. [ 16.499] (**) CHROME(0): Option "MigrationHeuristic" "greedy" [ 16.499] (II) EXA(0): Offscreen pixmap area of 63963136 bytes [ 16.499] (II) EXA(0): Driver registered support for the following operations: [ 16.499] (II) Solid [ 16.500] (II) Copy [ 16.500] (II) DownloadFromScreen [ 16.500] (II) CHROME(0): [EXA] Enabled EXA acceleration. [ 16.500] (==) CHROME(0): Backing store disabled [ 16.500] (II) CHROME(0): - Backing store set up [ 16.500] (II) CHROME(0): - SW cursor set up [ 16.500] (II) CHROME(0): HWCursor ARGB enabled [ 16.500] 16384 bytes of DRI memory allocated at 340040, handle 846157920 [ 16.500] 16384 bytes of DRI memory allocated at 344040, handle 2727303488 [ 16.500] (II) CHROME(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 16.501] (II) CHROME(0): - Def Color map set up [ 16.501] (II) CHROME(0): - Palette loaded [ 16.501] (II) CHROME(0): - Color maps etc. set up [ 16.501] (==) CHROME(0): DPMS enabled [ 16.501] (II) CHROME(0): - DPMS set up [ 16.501] (II) CHROME(0): VIAEnterVT [ 16.501] (II) CHROME(0): VIASave [ 16.501] (II) CHROME(0): Primary [ 16.503] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !! [ 16.503] (II) CHROME(0): Crtc... [ 16.503] (II) CHROME(0): TVSave... [ 16.503] (II) CHROME(0): VIASave [ 16.503] (II) CHROME(0): Primary [ 16.503] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !! [ 16.503] (II) CHROME(0): Crtc... [ 16.503] (II) CHROME(0): TVSave... [ 16.503] (II) CHROME(0): ViaDisplayDisableCRT [ 16.504] (II) CHROME(0): ViaDisplayDisableCRT [ 16.504] 16777216 bytes of DRI memory allocated at 348040, handle 4040121600 [ 16.504] (II) CHROME(0): [DRI] installation complete [ 16.504] (II) CHROME(0): [drm] IRQ handler installed, using IRQ 16. [ 16.505] (II) CHROME(0): [drm] Initialized AGP ring-buffer, size 0x200000 at AGP offset 0x1e00000. [ 16.505] (II) CHROME(0): direct rendering enabled [ 16.505] 4194304 bytes of DRI memory allocated at 0, handle 788922336 [ 16.505] (II) CHROME(0): Allocated 4096 kiB of AGP memory for EXA scratch area. [ 16.505] (II) CHROME(0): [Xv] Using PCI DMA for Xv image transfer. [ 16.505] 635904 bytes of DRI memory allocated at 1348040, handle 1285947200 [ 16.507] (II) CHROME(0): Benchmarking video copy. Less time is better. [ 16.514] (--) CHROME(0): Timed libc YUV420 copy... 2724092. Throughput: 435.6 MiB/s. [ 16.518] (--) CHROME(0): Timed kernel YUV420 copy... 2658316. Throughput: 446.4 MiB/s. [ 16.522] (--) CHROME(0): Timed SSE YUV420 copy... 2361744. Throughput: 502.5 MiB/s. [ 16.526] (--) CHROME(0): Timed MMX YUV420 copy... 2492364. Throughput: 476.1 MiB/s. [ 16.527] (--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by CPU. [ 16.531] (--) CHROME(0): Timed MMX2 YUV420 copy... 2428196. Throughput: 488.7 MiB/s. [ 16.531] Freed 20217920 (pool 4) [ 16.531] (--) CHROME(0): Using SSE YUV42X copy for video. [ 16.531] (II) CHROME(0): [XvMC] Registering chromeXvMC. [ 16.531] (II) CHROME(0): [XvMC] Initialized XvMC extension. [ 16.532] (II) CHROME(0): - Done [ 16.532] (--) RandR disabled [ 16.532] (II) Initializing built-in extension Generic Event Extension [ 16.532] (II) Initializing built-in extension SHAPE [ 16.532] (II) Initializing built-in extension MIT-SHM [ 16.532] (II) Initializing built-in extension XInputExtension [ 16.532] (II) Initializing built-in extension XTEST [ 16.532] (II) Initializing built-in extension BIG-REQUESTS [ 16.532] (II) Initializing built-in extension SYNC [ 16.532] (II) Initializing built-in extension XKEYBOARD [ 16.532] (II) Initializing built-in extension XC-MISC [ 16.532] (II) Initializing built-in extension SECURITY [ 16.532] (II) Initializing built-in extension XINERAMA [ 16.532] (II) Initializing built-in extension XFIXES [ 16.532] (II) Initializing built-in extension RENDER [ 16.533] (II) Initializing built-in extension RANDR [ 16.533] (II) Initializing built-in extension COMPOSITE [ 16.533] (II) Initializing built-in extension DAMAGE [ 16.564] (II) AIGLX: Screen 0 is not DRI2 capable [ 16.564] drmOpenDevice: node name is /dev/dri/card0 [ 16.564] drmOpenDevice: open result is 10, (OK) [ 16.565] drmOpenByBusid: Searching for BusID pci:0000:01:00.0 [ 16.565] drmOpenDevice: node name is /dev/dri/card0 [ 16.565] drmOpenDevice: open result is 10, (OK) [ 16.565] drmOpenByBusid: drmOpenMinor returns 10 [ 16.565] drmOpenByBusid: Interface 1.4 failed, trying 1.1 [ 16.565] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 [ 16.565] (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/unichrome_dri.so failed (/usr/lib/xorg/modules/dri/unichrome_dri.so: cannot open shared object file: No such file or directory) [ 16.566] (EE) AIGLX: reverting to software rendering [ 16.933] (II) AIGLX: Loaded and initialized swrast [ 16.933] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 18.030] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 18.031] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 18.031] (II) LoadModule: "evdev" [ 18.031] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 18.047] (II) Module evdev: vendor="X.Org Foundation" [ 18.047] compiled for 1.12.3, module version = 2.7.1 [ 18.047] Module class: X.Org XInput Driver [ 18.048] ABI class: X.Org XInput driver, version 16.0 [ 18.048] (II) Using input driver 'evdev' for 'Power Button' [ 18.048] (**) Power Button: always reports core events [ 18.048] (**) evdev: Power Button: Device: "/dev/input/event3" [ 18.048] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 18.048] (--) evdev: Power Button: Found keys [ 18.048] (II) evdev: Power Button: Configuring as keyboard [ 18.048] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 18.049] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 18.049] (**) Option "xkb_rules" "evdev" [ 18.049] (**) Option "xkb_model" "evdev" [ 18.049] (**) Option "xkb_layout" "us" [ 18.164] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 18.164] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 18.164] (II) Using input driver 'evdev' for 'Power Button' [ 18.164] (**) Power Button: always reports core events [ 18.164] (**) evdev: Power Button: Device: "/dev/input/event1" [ 18.164] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 18.165] (--) evdev: Power Button: Found keys [ 18.165] (II) evdev: Power Button: Configuring as keyboard [ 18.165] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1" [ 18.165] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 18.165] (**) Option "xkb_rules" "evdev" [ 18.165] (**) Option "xkb_model" "evdev" [ 18.165] (**) Option "xkb_layout" "us" [ 18.168] (II) config/udev: Adding input device Sleep Button (/dev/input/event2) [ 18.168] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 18.168] (II) Using input driver 'evdev' for 'Sleep Button' [ 18.168] (**) Sleep Button: always reports core events [ 18.168] (**) evdev: Sleep Button: Device: "/dev/input/event2" [ 18.168] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 18.168] (--) evdev: Sleep Button: Found keys [ 18.168] (II) evdev: Sleep Button: Configuring as keyboard [ 18.169] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2" [ 18.169] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 18.169] (**) Option "xkb_rules" "evdev" [ 18.169] (**) Option "xkb_model" "evdev" [ 18.169] (**) Option "xkb_layout" "us" [ 18.172] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 18.172] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 18.172] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 18.172] (**) AT Translated Set 2 keyboard: always reports core events [ 18.172] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 18.172] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 18.172] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 18.172] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 18.173] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 18.173] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [ 18.173] (**) Option "xkb_rules" "evdev" [ 18.173] (**) Option "xkb_model" "evdev" [ 18.173] (**) Option "xkb_layout" "us" [ 18.175] (II) config/udev: Adding input device PC Speaker (/dev/input/event4) [ 18.176] (II) No input driver specified, ignoring this device. [ 18.176] (II) This device may have been added with another device file. [ 20.350] (II) CHROME(0): ViaDisplayDisableCRT [ 22.224] (II) CHROME(0): ViaDisplayDisableCRT Dne Thu, 02 Aug 2012 00:07:03 +0200 James Simmons <[email protected]> napsal(a): > >> Hi Xavier again, >> >> The modeline is copied from working setting with shorter cable. >> >> The mode is added. I see it by VNC. But the CRT output is closed. >> The openchrome driver closes CRT output and >> xrandr can not open the CRT output because it does not see it. >> >> Wondering if any options exist to say openchrome driver: Don`t close CRT >> output. > > Can you try running x server without xorg.conf file. Also if that works I > like to see your xrandr output besides Xorg.logs. Thanks. > > >> Regards >> Filip >> >> Dne Wed, 01 Aug 2012 22:09:56 +0200 Filip Dvořák <[email protected]> >> napsal(a): >> >> > Hi Xavier, >> > >> > No the other laptops don`t use openchrome. >> > But I have tried openchrome version 0.2.906 today. It works. >> > >> > This setup works with shorter cable. >> > >> > I`m sure that the resolution is 1366x768. >> > >> > >> > Dne Wed, 01 Aug 2012 21:52:51 +0200 Xavier Bachelot >> <[email protected]> >> > napsal(a): >> > >> >> Hi Filip, >> >> >> >> On 08/01/2012 11:18 AM, Filip Dvořák wrote: >> >>> >> >>> Hello, >> >>> >> >>> I have been trying to use openchrome with longer cabel (5 metres). >> >>> The problem is that randr don`t see the monitor. >> >>> Cable is OK. I have tried 3 laptops and VESA driver. >> >>> I can not use VESA becouse VESA don`t know resolution 1366x768. >> >>> >> >> I'm not sure to fully understand what you tried, so I have a few >> >> questions. >> >> Are the other laptops all using openchrome ? >> >> Did this setup work with any of the other laptops ? >> >> Does this setup works with a standard length VGA cable ? >> >> Also, the resolution looks weird. Are you sure the native resolution >> of >> >> your external screen is 1366x768 ? It looks like a laptop's screen >> >> resolution. >> >> >> >>> It`s also impossible to open CRT(VGA) output without monitor. >> >>> >> >>> >> >>> The last lines in logs are: >> >>> [ 18.967] (II) CHROME(0): ViaDisplayEnableCRT >> >>> [ 21.514] (II) CHROME(0): ViaDisplayDisableCRT >> >>> [ 23.456] (II) CHROME(0): ViaDisplayDisableCRT >> >>> >> >>> My question is it possible to switch on CRT manually? >> >>> >> >> A quick search on the net turned out that it should be possible to do >> >> that by manually adding a mode to the output. Something like that : >> >> >> >> $ xrandr --addmode VGA1 1366x768 >> >> xrandr --output VGA1 --mode 1366x768 >> >> >> >> Possibly you might also need to add a modeline before doing the >> above : >> >> $ gtf 1366 768 60 >> >> >> >> # 1368x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 85.86 MHz >> >> Modeline "1368x768_60.00" 85.86 1368 1440 1584 1800 768 769 772 >> 795 >> >> -HSync +Vsync >> >> >> >> $ xrandr --newmode 1366x768 85.86 1368 1440 1584 1800 768 769 772 >> 795 >> >> -HSync +Vsync >> >> >> >> >> >> Never tried that myself, so your mileage may vary... >> >> >> >> Regards, >> >> Xavier >> >> >> >> >> >> _______________________________________________ >> >> openchrome-users mailing list >> >> [email protected] >> >> http://wiki.openchrome.org/mailman/listinfo/openchrome-users >> >> Main page: >> >> http://www.openchrome.org >> >> Wiki: >> >> http://www.openchrome.org/trac/wiki/TOC >> > >> > _______________________________________________ >> > openchrome-users mailing list >> > [email protected] >> > http://wiki.openchrome.org/mailman/listinfo/openchrome-users >> > Main page: >> > http://www.openchrome.org >> > Wiki: >> > http://www.openchrome.org/trac/wiki/TOC >> >> _______________________________________________ >> openchrome-users mailing list >> [email protected] >> http://wiki.openchrome.org/mailman/listinfo/openchrome-users >> Main page: >> http://www.openchrome.org >> Wiki: >> http://www.openchrome.org/trac/wiki/TOC _______________________________________________ openchrome-users mailing list [email protected] http://wiki.openchrome.org/mailman/listinfo/openchrome-users Main page: http://www.openchrome.org Wiki: http://www.openchrome.org/trac/wiki/TOC
