What is the equivalent of this when I'm using the c++ code (a code like
testRpl)? Do I have to use swctl?
Thanks,
Albert
On 04/03/2012 07:11 AM, Shepard Siegel wrote:
See lines 133-135
https://github.com/ShepardSiegel/ocpi/blob/master/bsv/wrk/DramServer_v6.bsv
The only bit that matters is bit 0.
The rest are for debug and may or may not be present based upon
hasDebugLogic
Be sure to wait a second or two after the
reset->unreset->initialize->start sequence before looking, as
read-capture training takes a while and we have not yet made that long
wait built into initialize (as it should be).
Look at testSeq9* if you are unsure of the sequence, e.g.
https://github.com/ShepardSiegel/ocpi/blob/master/bin/testSeq9b2
Please let me know if that was your issue.
-Shep
On Tue, Apr 3, 2012 at 1:05 AM, Albert Kwon <[email protected]
<mailto:[email protected]>> wrote:
Hi Shep,
I have a quick question about dramStatus variable in
DramServer_v6.bsv: is initComplete.read supposed to be 1 when DRAM
is ready?
When I get the value for dramStatus, it is always 16, which
seems like it means appFull = 1, and everything else is 0.
If so, how can I make sure that it is 1?
Thanks,
Albert
_______________________________________________
opencpi_dev mailing list
[email protected]
http://lists.opencpi.org/listinfo.cgi/opencpi_dev-opencpi.org
