Well, I will get the CVS from today and recompile the package. I thought the solution was to recompile dxui with GNU_SORUCE, apprantly that was not.
Suhaib > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Thomas A. > Gardiner > Sent: Wednesday, March 15, 2000 8:33 PM > To: opendx2-dev@lists.berlios.de > Subject: Re: [opendx-dev] dxui for Linux > > > Suhaib, > > I replaced the dxui from opendx-4.0.10-2.i386.rpm with the one you just > compiled and uploaded to the ftp server. The net result if that there are > still problems with the stepper interactors... I erased this version of > opendx entirely (rpm -e ...) and installed (rpm > -ivh ...) opendx-4.0.10-1.i386.rpm again to find out the way it ought to > work. One sample you can look at to see the problems is: > > UsingStreakline.net > > Try clicking on the streakline frame arrow buttons and you will find that > with opendx-4.0.10-1.i386.rpm the behavior is what one would expect while > with opendx-4.0.10-2.i386.rpm with or without the new dxui installed the > buttons have unpredictable behavior and the only way to be certain to get > the correct frame is to enter the number directly. Hope this helps... > > Tom > > On Wed, 15 Mar 2000, Suhaib M. Siddiqi wrote: > > >David > > > >I uplaoded to ftp.sdsc.edu the dxui.gz this a replacement dxui (gzpi > >compressed) for > >opendx-4.0.10-2.i386.rpm. Could you provide it to users as a patch. It > >should have > >stepper and Interactor problem fixed. Ater instaling rm user > will need to > >repalce the > >dxui in dx/bin_linux with this one. > > > >Suhaib > > > >
