Much better! Sau!
On Tue, 2017-11-21 at 15:02 -0800, California Sullivan wrote: > I wasn't able to install to my Optane SSD due to the following error: > > Formatting /dev/nvme0n1p1 to vfat... > mkfs.fat 4.1 (2017-01-24) > mkfs.vfat: unable to open /dev/nvme0n1p1: No such file or directory > Target install-efi failed > > A couple lines later I see: > > [ 10.265401] nvme0n1: p1 p2 p3 > > Then looking at the device itself after booting from a USB stick: > > root@intel-corei7-64: ~# ls /dev/nvme0n1* > /dev/nvme0n1 /dev/nvme0n1p1 /dev/nvme0n1p2 /dev/nvme0n1p3 > > So it looks like the parted commands return before the device node is > actually created. > > Work around this issue by waiting for device nodes for a short > duration. > > Signed-off-by: California Sullivan <california.l.sulli...@intel.com> > --- > v2: sleep conditionally for up to three seconds instead of one second > unconditionally. This makes it so if the device nodes are available > immediately, people don't have to wait, but a system has up to three > seconds to create them before failing. > > meta/recipes-core/initrdscripts/files/init-install-efi.sh | 7 > +++++++ > meta/recipes-core/initrdscripts/files/init-install.sh | 7 > +++++++ > 2 files changed, 14 insertions(+) > > diff --git a/meta/recipes-core/initrdscripts/files/init-install- > efi.sh b/meta/recipes-core/initrdscripts/files/init-install-efi.sh > index 5ad3a60..706418f 100644 > --- a/meta/recipes-core/initrdscripts/files/init-install-efi.sh > +++ b/meta/recipes-core/initrdscripts/files/init-install-efi.sh > @@ -186,6 +186,13 @@ parted ${device} mkpart swap linux-swap > $swap_start 100% > > parted ${device} print > > +echo "Waiting for device nodes..." > +C=0 > +while [ $C -ne 3 ] && [ ! -e $bootfs -o ! -e $rootfs -o ! -e $swap > ]; do > + C=$(( C + 1 )) > + sleep 1 > +done > + > echo "Formatting $bootfs to vfat..." > mkfs.vfat $bootfs > > diff --git a/meta/recipes-core/initrdscripts/files/init-install.sh > b/meta/recipes-core/initrdscripts/files/init-install.sh > index 1cac806..dade059 100644 > --- a/meta/recipes-core/initrdscripts/files/init-install.sh > +++ b/meta/recipes-core/initrdscripts/files/init-install.sh > @@ -211,6 +211,13 @@ parted ${device} mkpart $pname linux-swap > $swap_start 100% > > parted ${device} print > > +echo "Waiting for device nodes..." > +C=0 > +while [ $C -ne 3 ] && [ ! -e $bootfs -o ! -e $rootfs -o ! -e $swap > ]; do > + C=$(( C + 1 )) > + sleep 1 > +done > + > echo "Formatting $bootfs to ext3..." > mkfs.ext3 $bootfs > -- _______________________________________________ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.openembedded.org/mailman/listinfo/openembedded-core