On 11/2/11 5:47 PM, Martin Jansa wrote: > On Wed, Nov 02, 2011 at 05:31:59PM -0500, Mark Hatle wrote: >> On 11/2/11 5:11 PM, Martin Jansa wrote: >>> On Wed, Nov 02, 2011 at 04:39:42PM -0500, Mark Hatle wrote: >>>> On 11/2/11 4:22 PM, Martin Jansa wrote: >>>>> On Wed, Nov 02, 2011 at 04:11:57PM -0500, Mark Hatle wrote: >>>>>> Uprev to pseudo 1.2. >>>>>> >>>>>> This was heavily tested by building oe-core with numerous image >>>>>> configurations. Each configuration generated the same image before and >>>>>> after the change from the current to new version of pseudo. >>>>>> >>>>>> The primary purpose of this change is to enable the PSEUDO_UNLOAD >>>>>> functionality that may be used for performance enhancements in future >>>>>> versions of oe-core. >>>>>> >>>>>> The following changes since commit >>>>>> 37579d7d74d127c90c1e078d05c5bf4ba0b3f755: >>>>>> >>>>>> meta: glib-2.0: don't apply qsort_r test removable patch for native >>>>>> version (2011-11-02 09:08:21 +0000) >>>>>> >>>>>> are available in the git repository at: >>>>>> git://git.pokylinux.org/poky-contrib mhatle/pseudo >>>>>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=mhatle/pseudo >>>>> >>>>> Is there branch with pseudo-1.2 for oe-core? >>>> >>>> ^^^^^^^^^^^^^^^^^^^^^^^^ >>>> >>>> git://git.pokylinux.org/poky-contrib mhatle/pseudo >>>> >>>> Grab that -- or simply grab the top commit and add it to your oe-core >>>> checkout. >>> >>> Yes, but git cherry-pick would be faster and adding poky-contrib as >>> another git remote is not very efficient as it doesn't share any git >>> objects with oe-core repo so it checkouts "whole poky" again :/. >>> >>> So I'll use 2nd easiest option "pw-am.sh 14227". >>> >>>>> I would like to try it because we have strange errors when libstc++ >>>>> isn't found when building with pseudo, but same binaries are working >>>>> fine without pseudo (seems related to /etc/ld.so.cache being ignored >>>>> sometimes from pseudo env). >>>>> >>>>> And while I was trying to debug it I've noticed that files.db and >>>>> pseudo.log is quite big. >>>>> -rw-r--r-- 1 bitbake bitbake 240M Aug 15 13:49 files.db >>>>> -rw-r--r-- 1 bitbake bitbake 91K Aug 15 13:50 logs.db >>>>> -rw-r--r-- 1 bitbake bitbake 305M Aug 15 13:49 pseudo.log >>>> >>>> The files.db is based on the number of files accessed during the time >>>> pseudo is >>>> running. >>> >>> Ah ok, this was in sysroot which was created "Aug 9" so it gets pretty >>> big fast, lets hope that sqlite3 can handle it efficiently, or is there >>> some way to "cleanup" stale entries in files table? >> >> When you clean the build it will restart the pseudo DB. >> >>> ie I'm using eglibc-2.14, but files table is full of eglibc-2.13 entries >>> and _none_ from eglibc-2.14, is it supposed to be like this or is it >>> sign of some pseudo problems? >>> >>> sqlite> select count(*) from files where path like '%eglibc-2.13%'; >>> 20221 >>> sqlite> select count(*) from files where path like '%eglibc-2.14%'; >>> 0 >>> sqlite> select count(*) from files; >>> 1085380 >> >> The pseudo DB is specific to the tmp work directory. If the work directory >> hasn't changed (i.e. you aren't updating versions and pr) then the pseudo DB >> will continue to grow to accommodate the new files. >> >> There are flags within the DB if an erase operation occurs, but entries are >> only >> tagged as erased -- but not removed. This is due to speed issues. pseudo is >> significantly slower on remove and replace operations if the DB entries are >> removed. >> >>>> logs.db and pseudo.log are based on the debug settings of pseudo. If you >>>> don't >>>> have debugging enabled (you would have to do this manually) and the logs >>>> are >>>> that big, something is going seriously wrong with the path/inode >>>> translation... >>>> It's fairly normal to have a set of logs that are in the 10-20k range for >>>> complex packages.. (These are documenting cases where pseudo has to guess >>>> about >>>> inode to path mapping..) >>> >>> This was generated without debug enabled.. but maybe because of rm_work, >>> see below... >>> >>>>> with pseudo.log full of errors like this >>>>> pseudo: path mismatch [12 links]: ino 39721500 db >>>>> '/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/vim-7.2.446-r10.3/image/usr/share/vim/vim72/tutor' >>>>> req >>>>> '/OE/shr-core/tmp/work/om_gta02-oe-linux-gnueabi/task-shr-feed-1.0-r96'. >>>> >>>> Are you building on a NFS filesystem? NFS (and a few other filesystems) >>>> have a >>>> habit of remapping inodes out from under the filesystem. pseudo uses the >>>> inodes >>>> as a validation that the file hasn't changed. If these inodes are >>>> changing, >>>> pseudo will do it's best to keep things in sync, but there is a chance it >>>> won't >>>> always succeed. >>> >>> No I'm building on local ext3 filesystem, but I'm also using rm_work, so >>> /OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/vim-7.2.446-r10.3/image/usr/share/vim/vim72/tutor >>> is probably long gone and inode 39721500 wasn't marked as unused in >>> pseudo world or do I read it wrong? >> >> If you use rm_work, then the pseudo DB located within the work directory will >> also be removed. So I'm not sure why you would be having such a large DB. > > But I was talking about pseudo db here: > tmp/sysroots/x86_64-linux/var/pseudo/
I just checked my system and the logs in the sysroot isn't very large. I'm curious as to why things are as big on your system. > now with pseudo-1.2 I still have quite a few warnings about inodes in > pseudo.log now in work directory, ie python build: > OE @ ~/shr-core/tmp/work/armv4t-oe-linux-gnueabi/python-2.7.2-r0.1 $ > -rw-r--r-- 1 bitbake bitbake 5.2M Nov 2 23:44 files.db > -rw-r--r-- 1 bitbake bitbake 4.0K Nov 2 23:44 logs.db > -rw-r--r-- 1 bitbake bitbake 46K Nov 2 23:44 pseudo.log > > pseudo: dir err : 1240102 > ['/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/python-2.7.2-r0.1/deploy-ipks/armv4t/IPKG_BUILD.25064'] > (db 'no path') db mode 0100644, header mode 040755 (unlinking db) > pseudo: creat for > '/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/python-2.7.2-r0.1/deploy-ipks/armv4t/stvITxha' > replaces existing 1240107 ['no path']. > wxr-xr-x 1 bitbake bitbake 0 Nov 2 23:44 pseudo.socket > pseudo: path mismatch [2 links]: ino 1240673 db > '/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/python-2.7.2-r0.1/sstate-build-package/package/usr/bin/python2.7' > req > '/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/python-2.7.2-r0.1/sstate-build-package/package/usr/bin/python'. None of the inode processing was changed in 1.2, only code that was specific to pseudo preloading and the clone(2) function wrapper. The 'no path' messages.. (see the first and second ones above) are the ones where a file and/or directory was created outside of pseudo, and then referenced by the inode directly. Once referenced by name and not inode it was able to correlate them. This is somewhat expected and a model that will be looked at in the near? future by the pseudo maintainer.. (he and I talked about it.. and the fact we're getting so many of those messages is surprising.) The later one indicates that the inode 1240673 was defined as belonging to one item, but a second item showed up instead. This usually means that something was renamed outside of the control of pseudo. This is more likely to be a problem then the first two. --Mark _______________________________________________ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core