An empty manifest will cause a failure condition. We ensure that any install
actions occur only with a manifest larger then size 0. Also ensure that padding
is added to the end of the manifest, instead of the beginning to enable this
size check. (Padding is required for very small manifest files..)
Signed-off-by: Mark Hatle <mark.ha...@windriver.com>
---
meta/classes/package_rpm.bbclass | 59 ++++++++++++++++++++++----------------
1 files changed, 34 insertions(+), 25 deletions(-)
diff --git a/meta/classes/package_rpm.bbclass b/meta/classes/package_rpm.bbclass
index b84c044..bb9aa1a 100644
--- a/meta/classes/package_rpm.bbclass
+++ b/meta/classes/package_rpm.bbclass
@@ -182,6 +182,7 @@ rpm_update_pkg () {
# been run by now, so don't have to run them(preun, postun, etc.) when
# erase the pkg
if [ -s ${target_rootfs}/install/remove.manifest ]; then
+ echo "# Removal manifest padding...." >>
${target_rootfs}/install/remove.manifest
rpm_common_comand --noscripts --nodeps \
-e `cat ${target_rootfs}/install/remove.manifest`
fi
@@ -249,7 +250,7 @@ package_install_internal_rpm () {
# Setup manifest of packages to install...
mkdir -p ${target_rootfs}/install
- echo "# Install manifest" > ${target_rootfs}/install/install.manifest
+ rm -f ${target_rootfs}/install/install.manifest
# Uclibc builds don't provide this stuff...
if [ x${TARGET_OS} = "xlinux" ] || [ x${TARGET_OS} = "xlinux-gnueabi" ]
; then
@@ -309,12 +310,15 @@ package_install_internal_rpm () {
# Generate an install solution by doing a --justdb install, then
recreate it with
# an actual package install!
- ${RPM} --predefine "_rpmds_sysinfo_path
${target_rootfs}/etc/rpm/sysinfo" \
- --predefine "_rpmrc_platform_path
${target_rootfs}/etc/rpm/platform" \
- -D "_dbpath ${target_rootfs}/install" -D "`cat
${confbase}-base_archs.macro`" \
- -D "__dbi_txn create nofsync" \
- -U --justdb --noscripts --notriggers --noparentdirs --nolinktos
--ignoresize \
- ${target_rootfs}/install/install.manifest
+ if [ -s ${target_rootfs}/install/install.manifest ]; then
+ echo "# Install manifest padding" >>
${target_rootfs}/install/install.manifest
+ ${RPM} --predefine "_rpmds_sysinfo_path
${target_rootfs}/etc/rpm/sysinfo" \
+ --predefine "_rpmrc_platform_path
${target_rootfs}/etc/rpm/platform" \
+ -D "_dbpath ${target_rootfs}/install" -D "`cat
${confbase}-base_archs.macro`" \
+ -D "__dbi_txn create nofsync" \
+ -U --justdb --noscripts --notriggers --noparentdirs
--nolinktos --ignoresize \
+ ${target_rootfs}/install/install.manifest
+ fi
if [ ! -z "${package_attemptonly}" ]; then
echo "Adding attempt only packages..."
@@ -407,8 +411,9 @@ package_install_internal_rpm () {
touch ${target_rootfs}/install/install_multilib_solution.manifest
- if [ -e "${target_rootfs}/install/install_multilib.manifest" ]; then
+ if [ -s "${target_rootfs}/install/install_multilib.manifest" ]; then
# multilib package installation
+ echo "# Install multilib manifest padding" >>
${target_rootfs}/install/install_multilib.manifest
# Generate an install solution by doing a --justdb install,
then recreate it with
# an actual package install!
@@ -493,33 +498,37 @@ EOF
if [ "${INC_RPM_IMAGE_GEN}" = "1" -a -f "$pre_btmanifest" ]; then
echo "Skipping pre install due to exisitng image"
else
- echo "# Initial Install manifest" >
${target_rootfs}/install/initial_install.manifest
+ rm -f ${target_rootfs}/install/initial_install.manifest
echo "Installing base dependencies first (base-passwd,
base-files and shadow) since rpm is special"
grep /base-passwd-[0-9]
${target_rootfs}/install/total_solution.manifest >>
${target_rootfs}/install/initial_install.manifest || true
grep /base-files-[0-9]
${target_rootfs}/install/total_solution.manifest >>
${target_rootfs}/install/initial_install.manifest || true
grep /shadow-[0-9]
${target_rootfs}/install/total_solution.manifest >>
${target_rootfs}/install/initial_install.manifest || true
- # Generate an install solution by doing a --justdb install,
then recreate it with
- # an actual package install!
- mkdir -p ${target_rootfs}/initial
+ if [ -s ${target_rootfs}/install/initial_install.manifest ];
then
+ echo "# Initial Install manifest padding..." >>
${target_rootfs}/install/initial_install.manifest
- ${RPM} --predefine "_rpmds_sysinfo_path
${target_rootfs}/etc/rpm/sysinfo" \
- --predefine "_rpmrc_platform_path
${target_rootfs}/etc/rpm/platform" \
- -D "_dbpath ${target_rootfs}/initial" -D "`cat
${confbase}.macro`" \
- -D "__dbi_txn create nofsync" \
- -U --justdb --noscripts --notriggers --noparentdirs
--nolinktos --ignoresize \
- ${target_rootfs}/install/initial_install.manifest
+ # Generate an install solution by doing a --justdb
install, then recreate it with
+ # an actual package install!
+ mkdir -p ${target_rootfs}/initial
- ${RPM} -D "_dbpath ${target_rootfs}/initial" -qa --qf
"%{packageorigin}\n" \
- -D "__dbi_txn create nofsync private" \
- > ${target_rootfs}/install/initial_solution.manifest
+ ${RPM} --predefine "_rpmds_sysinfo_path
${target_rootfs}/etc/rpm/sysinfo" \
+ --predefine "_rpmrc_platform_path
${target_rootfs}/etc/rpm/platform" \
+ -D "_dbpath ${target_rootfs}/initial" -D "`cat
${confbase}.macro`" \
+ -D "__dbi_txn create nofsync" \
+ -U --justdb --noscripts --notriggers
--noparentdirs --nolinktos --ignoresize \
+
${target_rootfs}/install/initial_install.manifest
+
+ ${RPM} -D "_dbpath ${target_rootfs}/initial" -qa --qf
"%{packageorigin}\n" \
+ -D "__dbi_txn create nofsync private" \
+ >
${target_rootfs}/install/initial_solution.manifest
- rpm_update_pkg
${target_rootfs}/install/initial_solution.manifest
+ rpm_update_pkg
${target_rootfs}/install/initial_solution.manifest
- grep -Fv -f ${target_rootfs}/install/initial_solution.manifest
${target_rootfs}/install/total_solution.manifest >
${target_rootfs}/install/total_solution.manifest.new
- mv ${target_rootfs}/install/total_solution.manifest.new
${target_rootfs}/install/total_solution.manifest
+ grep -Fv -f
${target_rootfs}/install/initial_solution.manifest
${target_rootfs}/install/total_solution.manifest >
${target_rootfs}/install/total_solution.manifest.new
+ mv ${target_rootfs}/install/total_solution.manifest.new
${target_rootfs}/install/total_solution.manifest
- rm -rf ${target_rootfs}/initial
+ rm -rf ${target_rootfs}/initial
+ fi
fi
echo "Installing main solution manifest
(${target_rootfs}/install/total_solution.manifest)"
--
1.7.3.4
_______________________________________________
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
