Problem solved - nothing to do with gobject introspection but from the other change I had made, to build for qemu. packagegroup-core-device-devel is pulled in for qemu targets in poky.conf and packagegroup-core-device-devel rdepends on distcc-config. > To: openembedded-core@lists.openembedded.org> From: > alexander.kana...@linux.intel.com > Date: Mon, 4 Jan 2016 14:49:13 +0200 > Subject: Re: [OE-core] gobject introspection - distccd? > > On 01/04/2016 02:24 PM, Chris Trobridge wrote: > > That's what I was thinking: gobject-introspection doesn't call it in > > directly but it does require compilation to be performed on the 'target' > > system and that could pull it in indirectly. > > g-introspection does not require compilation to be performed on the > target. It requires running binaries that were cross-compiled for the > target architecture, which is achieved by running them using qemu.
That's what I meant to imply by putting target in quotes. > > distcc (and hence avahi) are not required, so is this a general problem > > or just something I should explicitly remove from my image? > > I think it's a problem of your local setup; the g-o patchset definitely > doesn't involve distcc at any point. You can build against a clean > directory with only basic poky layers to verify that. > > > Alex Thanks,Chris
-- _______________________________________________ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.openembedded.org/mailman/listinfo/openembedded-core