Dear Jagadeesh,

On 10.10.2016 19:35, Jagadeesh Krishnanjanappa wrote:
> Following are the drawbacks with the current logic:
> 1. If ip=dhcp in the boot command line, then the
> current code makes connman to ignore "eth0" network interface
> from managing internet connections. This can cause NFS boot
> failure, if the network interface used for NFS booting 
> is other than "eth0".
> 
> 2. If ip=bootp in the boot command line, then none of the
> network interfaces are ignored. This makes connman to manage
> internet connections on every active network interfaces
> (including the network interface used for NFS booting), resulting
> hang during NFS boot.
> 
> This patch finds the network interface used for NFS booting via dmesg.
> It searches for "device=" string from dmesg output and finds
> name of network interface used for NFS. The "device=" string
> is printed from dmesg, if IPCONFIG_SILENT macro is disabled
> in the kernel, and this macro is disabled by default.
> 
> If "device=" string is not found, then falls back to earlier logic.
> The earlier logic of detecting NFS network interface is retained, as
> we cannot determine the exact network interface name used during
> NFS bootup.

I think this is too fragile to land in OE-Core. What happens if a
network driver prints "device=eth0"? Or if other kernel messages make
the string disappear from dmesg and connman gets restarted later?

FWIW, I'm attaching my current wrapper script for connmand. I don't
think it's perfect, but at least it doesn't depend on any init manager
and works across restarts.

Add these lines to connman's do_install, in case you'd like to test
and/or submit it:

mv ${D}${sbindir}/connmand ${D}${sbindir}/connmand.real
install -m 755 ${WORKDIR}/connmand-nfsroot.in ${D}${sbindir}/connmand
sed -e 's,@sbindir@,${sbindir},g' -i ${D}${sbindir}/connmand

Regards,
Andreas

> 
> Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjana...@mvista.com>
> ---
>  meta/recipes-connectivity/connman/connman/connman | 35 
> +++++++++++++----------
>  1 file changed, 20 insertions(+), 15 deletions(-)
> 
> diff --git a/meta/recipes-connectivity/connman/connman/connman 
> b/meta/recipes-connectivity/connman/connman/connman
> index c64fa0d..aae2ca6 100644
> --- a/meta/recipes-connectivity/connman/connman/connman
> +++ b/meta/recipes-connectivity/connman/connman/connman
> @@ -29,23 +29,28 @@ done
>  do_start() {
>       EXTRA_PARAM=""
>       if test $nfsroot -eq 1 ; then
> -         NET_DEVS=`cat /proc/net/dev | sed -ne 's/^\([a-zA-Z0-9 
> ]*\):.*$/\1/p'`
> -         NET_ADDR=`cat /proc/cmdline | sed -ne 's/^.*ip=\([^ :]*\).*$/\1/p'`
> +         ethn_from_dmesg=`dmesg | grep "device="| sed 
> "s|\(.*\)device=\(.*\), hwaddr=\(.*\)|\2|g"`
> +         if [ ! -z "$ethn_from_dmesg" ]; then
> +             EXTRA_PARAM="-I $ethn_from_dmesg"
> +         else
> +             NET_DEVS=`cat /proc/net/dev | sed -ne 's/^\([a-zA-Z0-9 
> ]*\):.*$/\1/p'`
> +             NET_ADDR=`cat /proc/cmdline | sed -ne 's/^.*ip=\([^ 
> :]*\).*$/\1/p'`
>  
> -         if [ ! -z "$NET_ADDR" ]; then
> -             if [ "$NET_ADDR" = dhcp ]; then
> -                 ethn=`ifconfig | grep "^eth" | sed -e 
> "s/\(eth[0-9]\)\(.*\)/\1/"`
> -                 if [ ! -z "$ethn" ]; then
> -                     EXTRA_PARAM="-I $ethn"
> -                 fi
> -             else
> -                 for i in $NET_DEVS; do
> -                     ADDR=`ifconfig $i | sed 's/addr://g' | sed -ne 
> 's/^.*inet \([0-9.]*\) .*$/\1/p'`
> -                     if [ "$NET_ADDR" = "$ADDR" ]; then
> -                         EXTRA_PARAM="-I $i"
> -                         break
> +             if [ ! -z "$NET_ADDR" ]; then
> +                 if [ "$NET_ADDR" = dhcp ]; then
> +                     ethn=`ifconfig | grep "^eth" | sed -e 
> "s/\(eth[0-9]\)\(.*\)/\1/"`
> +                     if [ ! -z "$ethn" ]; then
> +                         EXTRA_PARAM="-I $ethn"
>                       fi
> -                 done
> +                 else
> +                     for i in $NET_DEVS; do
> +                         ADDR=`ifconfig $i | sed 's/addr://g' | sed -ne 
> 's/^.*inet \([0-9.]*\) .*$/\1/p'`
> +                         if [ "$NET_ADDR" = "$ADDR" ]; then
> +                             EXTRA_PARAM="-I $i"
> +                             break
> +                         fi
> +                     done
> +                 fi
>               fi
>           fi
>       fi
> 

#!/bin/sh
#
# Copyright (c) 2016 Dream Property GmbH, Germany
#                    http://www.dream-multimedia-tv.de/
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.

parse_cmdline() {
        local ip=
        local nfsroot=
        local root=
        local options=

        set -- $(cat /proc/cmdline)
        for arg do
                key=${arg%%=*}
                if [ "$arg" = "$key" ]; then
                        val=
                else
                        val=${arg#*=}
                fi
                case "$key" in
                        ip)
                                ip=${val%%:*}
                                ;;
                        nfsroot)
                                nfsroot=$val
                                ;;
                        root)
                                root=$val
                                ;;
                esac
        done

        if [ "$root" = "/dev/nfs" -o -n "$nfsroot" -a -n "$ip" ]; then
                set -- $(ip -4 -o addr show | awk '{print $2}')
                for dev do
                        if ip -o link show $dev | awk '{print $3}' | grep -qvw 
-e 'LOOPBACK' -e 'NO-CARRIER'; then
                                case "$ip" in
                                        any|bootp|both|dhcp|on|rarp)
                                                options="-I $dev $options"
                                                ;;
                                        *)
                                                for dev_addr in $(ip -4 -o addr 
show dev $dev | awk '{print $4}' | grep -o '^[0-9.]\+'); do
                                                        if [ "$ip" = 
"$dev_addr" ]; then
                                                                options="-I 
$dev"
                                                                break
                                                        fi
                                                done
                                                ;;
                                esac
                        fi
                done
        fi

        echo "$options"
}

nfsroot_options() {
        if [ ! -f /run/connman/nfsroot.env ]; then
                mkdir -p /run/connman
                parse_cmdline >/run/connman/nfsroot.env
        fi

        cat /run/connman/nfsroot.env
}

exec "@sbindir@/connmand.real" "$@" $(nfsroot_options)
-- 
_______________________________________________
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Reply via email to