* Fix u-boot entry and load address * Prefered kernel based on xilinx repos, not all drivers in mainline tree * Add device nodes for system ace
Signed-off-by: Adrian Alonso <aalons...@gmail.com> --- conf/machine/xilinx-ml507.conf | 11 ++++++++--- 1 files changed, 8 insertions(+), 3 deletions(-) diff --git a/conf/machine/xilinx-ml507.conf b/conf/machine/xilinx-ml507.conf index b2448e3..693f904 100644 --- a/conf/machine/xilinx-ml507.conf +++ b/conf/machine/xilinx-ml507.conf @@ -11,15 +11,18 @@ TARGET_FPU = "soft" require conf/machine/include/tune-ppc440.inc #ASSUME_PROVIDED += "virtual/kernel" -PREFERRED_PROVIDER_virtual/kernel = "linux" +PREFERRED_PROVIDER_virtual/kernel = "linux-xilinx-ml507" KERNEL_IMAGETYPE = "uImage" -MACHINE_FEATURES = "kernel26 ext2 usbhost udev" +MACHINE_FEATURES = "kernel26 apm ext2 vfat ethernet" MACHINE_EXTRA_RECOMMENDS = "kernel-modules" UBOOT_ARCH = "ppc" UBOOT_MACHINE = "ml507_config" +UBOOT_ENTRYPOINT ?= "0x00000000" +UBOOT_LOADADDRESS ?= "0x00000000" +PREFERRED_VERSION_u-boot_xilinx-ml507 = "git" # Xilinx EDK override hardware definitions for xilinx-bsp # Include in your local.conf @@ -30,4 +33,6 @@ UBOOT_MACHINE = "ml507_config" USE_VT = "0" SERIAL_CONSOLE = "9600 ttyS0" - +# Device nodes add xsa for (system ace) +IMAGE_DEVICE_TABLES = "files/device_table-minimal.txt \ + files/device_table_add-xsa.txt" -- 1.6.6.1 _______________________________________________ Openembedded-devel mailing list Openembedded-devel@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
