Stock ones work better (remounting / rw, makedevs calling).
Signed-off-by: Filip Zyzniewski <filip.zyzniew...@gmail.com>
---
.../initscripts-1.0/jornada7xx/checkroot | 211 --------------------
.../initscripts/initscripts-1.0/jornada7xx/devices | 70 -------
2 files changed, 0 insertions(+), 281 deletions(-)
delete mode 100755 recipes/initscripts/initscripts-1.0/jornada7xx/checkroot
delete mode 100755 recipes/initscripts/initscripts-1.0/jornada7xx/devices
diff --git a/recipes/initscripts/initscripts-1.0/jornada7xx/checkroot
b/recipes/initscripts/initscripts-1.0/jornada7xx/checkroot
deleted file mode 100755
index 9e2d3cf..0000000
--- a/recipes/initscripts/initscripts-1.0/jornada7xx/checkroot
+++ /dev/null
@@ -1,211 +0,0 @@
-#
-# checkroot.sh Check to root filesystem.
-#
-# Version: @(#)checkroot.sh 2.84 25-Jan-2002 miqu...@cistron.nl
-#
-
-. /etc/default/rcS
-
-#
-# Set SULOGIN in /etc/default/rcS to yes if you want a sulogin to be spawned
-# from this script *before anything else* with a timeout, like SCO does.
-#
-test "$SULOGIN" = yes && sulogin -t 30 $CONSOLE
-
-#
-# Ensure that bdflush (update) is running before any major I/O is
-# performed (the following fsck is a good example of such activity :).
-#
-test -x /sbin/update && update
-
-#
-# Read /etc/fstab.
-#
-exec 9>&0 </etc/fstab
-rootmode=rw
-rootopts=rw
-test "$ENABLE_ROOTFS_FSCK" = yes && rootcheck="yes" || rootcheck="no"
-swap_on_md=no
-devfs=
-while read fs mnt type opts dump pass junk
-do
- case "$fs" in
- ""|\#*)
- continue;
- ;;
- /dev/md*)
- # Swap on md device.
- test "$type" = swap && swap_on_md=yes
- ;;
- /dev/*)
- ;;
- *)
- # Might be a swapfile.
- test "$type" = swap && swap_on_md=yes
- ;;
- esac
-
- test "$type" = devfs && devfs="$fs"
-
- # Currently we do not care about the other entries
- if test "$mnt" = "/"
- then
- #echo "[$fs] [$mnt] [$type] [$opts] [$dump] [$pass] [$junk]"
-
- rootopts="$opts"
- roottype="$type"
-
- #The "spinner" is broken on busybox sh
- TERM=dumb
-
- test "$pass" = 0 -o "$pass" = "" && rootcheck=no
-
- # Enable fsck for ext2 and ext3 rootfs, disable for everything
else
- case "$type" in
- ext3) rootcheck=yes;;
- *) rootcheck=no;;
- esac
-
- if test "$rootcheck" = yes
- then
- if ! test -x "/sbin/fsck.${roottype}"
- then
- echo -e "\n * * * WARNING:
/sbin/fsck.${roottype} is missing! * * *\n"
- rootcheck=no
- fi
- fi
-
- case "$opts" in
- ro|ro,*|*,ro|*,ro,*)
- rootmode=ro
- ;;
- esac
- fi
-done
-exec 0>&9 9>&-
-
-#
-# Activate the swap device(s) in /etc/fstab. This needs to be done
-# before fsck, since fsck can be quite memory-hungry.
-#
-doswap=no
-test -d /proc/1 || mount -n /proc
-case "`uname -r`" in
- 2.[0123].*)
- if test $swap_on_md = yes && grep -qs resync /proc/mdstat
- then
- test "$VERBOSE" != no && echo "Not activating swap -
RAID array resyncing"
- else
- doswap=yes
- fi
- ;;
- *)
- doswap=yes
- ;;
-esac
-if test $doswap = yes
-then
- test "$VERBOSE" != no && echo "Activating swap"
- swapon -a 2> /dev/null
-fi
-
-#
-# Check the root filesystem.
-#
-if test -f /fastboot || test $rootcheck = no
-then
- test $rootcheck = yes && echo "Fast boot, no filesystem check"
-else
- #
- # Ensure that root is quiescent and read-only before fsck'ing.
- #
- mount -n -o remount,ro /
- if test $? = 0
- then
- if test -f /forcefsck
- then
- force="-f"
- else
- force=""
- fi
- if test "$FSCKFIX" = yes
- then
- fix="-y"
- else
- fix="-a"
- fi
- spinner="-C"
- case "$TERM" in
- dumb|network|unknown|"") spinner="" ;;
- esac
- test `uname -m` = s390 && spinner="" # This should go away
- test "$VERBOSE" != no && echo "Checking root filesystem..."
- fsck $spinner $force $fix /
- #
- # If there was a failure, drop into single-user mode.
- #
- # NOTE: "failure" is defined as exiting with a return code of
- # 2 or larger. A return code of 1 indicates that filesystem
- # errors were corrected but that the boot may proceed.
- #
- if test "$?" -gt 1
- then
-
- # Since this script is run very early in the boot-process, it should be
safe to assume that the
- # output is printed to VT1. However, some distributions use a bootsplash
to hide the "ugly" boot
- # messages and having the bootsplash "hang" due to a waiting fsck prompt
is less than ideal
- chvt 1
-
- # Surprise! Re-directing from a HERE document (as in
- # "cat << EOF") won't work, because the root is read-only.
- echo
- echo "fsck failed. Please repair manually and reboot. Please note"
- echo "that the root filesystem is currently mounted read-only. To"
- echo "remount it read-write:"
- echo
- echo " # mount -n -o remount,rw /"
- echo
- echo "CONTROL-D will exit from this shell and REBOOT the system."
- echo
- # Start a single user shell on the console
- /sbin/sulogin $CONSOLE
- reboot -f
- fi
- else
- echo "*** ERROR! Cannot fsck root fs because it is not mounted read-only!"
- echo
- fi
-fi
-
-#
-# If the root filesystem was not marked as read-only in /etc/fstab,
-# remount the rootfs rw but do not try to change mtab because it
-# is on a ro fs until the remount succeeded. Then clean up old mtabs
-# and finally write the new mtab.
-# This part is only needed if the rootfs was mounted ro.
-#
-if [ $(grep rootfs /proc/mounts | awk '{print $4}') = rw ]; then
- exit 0
-fi
-
-# Add a second check, which seems to be needed for some kernel versions
-if [ $(grep "/dev/root" /proc/mounts | awk '{print $4}') = rw ]; then
- exit 0
-fi
-
-
-echo "Remounting root file system..."
-mount -n -o remount,$rootmode /
-if test "$rootmode" = rw
-then
- if test ! -L /etc/mtab
- then
- rm -f /etc/mtab~ /etc/nologin
- : > /etc/mtab
- fi
- mount -f -o remount /
- mount -f /proc
- test "$devfs" && grep -q '^devfs /dev' /proc/mounts && mount -f "$devfs"
-fi
-
-: exit 0
diff --git a/recipes/initscripts/initscripts-1.0/jornada7xx/devices
b/recipes/initscripts/initscripts-1.0/jornada7xx/devices
deleted file mode 100755
index 422336a..0000000
--- a/recipes/initscripts/initscripts-1.0/jornada7xx/devices
+++ /dev/null
@@ -1,70 +0,0 @@
-#!/bin/sh
-#
-# Devfs handling script. Since we arent running devfsd due to various reasons
-# which I will not lay out here, we need to create some links for
compatibility.
-
-. /etc/default/rcS
-
-# exit without doing anything if udev is active
-if test -e /dev/.udevdb; then
- exit 0
-fi
-
-if test -e /dev/.devfsd
-then
- if test "$VERBOSE" != "no"; then echo -n "Setting up device links for
devfs: "; fi
- ln -s /dev/touchscreen/0 /dev/ts
- ln -s /dev/touchscreen/0raw /dev/tsraw
- ln -s /dev/vc/0 /dev/tty0
- ln -s /dev/vc/1 /dev/tty1
- ln -s /dev/vc/2 /dev/tty2
- ln -s /dev/vc/3 /dev/tty3
- ln -s /dev/vc/4 /dev/tty4
- ln -s /dev/vc/5 /dev/tty5
- ln -s /dev/fb/0 /dev/fb0
-# ln -s /dev/tts/0 /dev/ttySA0
-# ln -s /dev/tts/1 /dev/ttySA1
-# ln -s /dev/tts/2 /dev/ttySA2
-
- ln -s /dev/sound/dsp /dev/dsp
- ln -s /dev/sound/mixer /dev/mixer
-
- ln -s /dev/v4l/video0 /dev/video0
- ln -s /dev/v4l/video0 /dev/video
- ln -s /dev/misc/rtc /dev/rtc
-
- ## need this so that ppp will autoload the ppp modules
- mknod /dev/ppp c 108 0
-
- if test "$VERBOSE" != "no"; then echo "done"; fi
-else
- if test "$VERBOSE" != "no"; then echo -n "Mounting /dev ramdisk: "; fi
- mount -t ramfs ramfs /dev || mount -t tmpfs ramfs /dev
- if test $? -ne 0; then
- if test "$VERBOSE" != "no"; then echo "failed"; fi
- else
- if test "$VERBOSE" != "no"; then echo "done"; fi
- fi
- if test "$VERBOSE" != "no"; then echo -n "Populating /dev: "; fi
- cd /
- mkdir -p dev/input
- mknod /dev/input/ts0 c 13 65
- mknod /dev/ttySC1 c 9 204
- mknod /dev/irda0 c 10 204
- mkdir -p dev/msys
- mkdir -p dev/pts
- mkdir -p dev/vc
- for i in 0 1 2 3 4 5 6 7 8 9; do
- ln -s /dev/tty$i /dev/vc/$i
- done
- ln -sf /proc/self/fd /dev/fd
- ln -sf /proc/kcore /dev/core
- /sbin/makedevs -r / -D /etc/device_table
- if test $? -ne 0; then
- if test "$VERBOSE" != "no"; then echo "failed"; fi
- else
- if test "$VERBOSE" != "no"; then echo "done"; fi
- fi
-fi
-
-exit 0
--
1.7.1
_______________________________________________
Openembedded-devel mailing list
Openembedded-devel@lists.openembedded.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
