* Remove hard-coded references to the xilinx hardware bitstream file, and allow selection via a variable XILINX_BITSTREAM_FILE .
Signed-off-by: Elvis Dowson <elvis.dow...@gmail.com> --- classes/xilinx-boot.bbclass | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/classes/xilinx-boot.bbclass b/classes/xilinx-boot.bbclass index 85fb6d9..871f82a 100644 --- a/classes/xilinx-boot.bbclass +++ b/classes/xilinx-boot.bbclass @@ -104,7 +104,9 @@ fi # For Xilinx EDK 13.1 Bootloop is set by default # cd ${XILINX_BSP_PATH} -if [ ! -f implementation/download.bit ]; then +#XILINX_BITSTREAM_FILE=implementation/download.bit +XILINX_BITSTREAM_FILE=implementation/system.bit +if [ ! -f ${XILINX_BITSTREAM_FILE} ]; then # Bitstream not found generate it bbnote "bitstream not found, generating it" make -f ${XILINX_BSP_PATH}/system.make init_bram @@ -114,7 +116,7 @@ if [ "${TARGET_ARCH}" = "powerpc" ]; then # Find u-boot start address start_address=`${TARGET_PREFIX}objdump -x u-boot | grep -w "start address" | cut -d ' ' -f3` # Generate ACE image - xmd -tcl genace.tcl -hw implementation/download.bit -elf u-boot \ + xmd -tcl genace.tcl -hw ${XILINX_BITSTREAM_FILE} -elf u-boot \ -target ppc_hw -start_address ${start_address} -ace u-boot-${XILINX_BOARD}.ace \ -board ${XILINX_BOARD} fi -- 1.7.9.5 _______________________________________________ Openembedded-devel mailing list Openembedded-devel@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel