On Wed, Apr 03, 2013 at 06:50:46PM +0200, Carlos Rafael Giani wrote: > Hello, > > I have created a BSP layer for the SolidRun Cubox platform. Informations > about this device can be found athttp://solid-run.com/cubox . > The layer itself is hosted athttps://github.com/dv1/meta-cubox . > > This layer introduces a new machine, new tunes for the CuBox' Marvell PJ4 > processor, in addition to the platform specific recipes for hardware video > acceleration and EGL,OpenGL ES,OpenVG support. Both hardfp and softfp are > supported. > The 3D accelerator and the hardware accelerated video engine (called vMeta) > require some closed source components. The recipes pick the right ones > depending on whether softpfp or hardfp is used. > > It also copies the generated uImage into the rootfs (as expected by the > bootloader), and autogenerates a boot.scr out of an included boot script > using uboot-mkimage. > The resulting tarball is extracted on an SD card, and the device can be > booted. > > A new xorg driver and a customized xorg.conf are included. > > I'm open to feedback, patches, suggestions. > > Thanks
Hi, nice work, but I wonder why the u-boot needs a boot.scr. Is it that old or can you switch it over to uEnv.txt so it is easier for people to change kernel cmdline and other u-boot config stuff. Bye Henning _______________________________________________ Openembedded-devel mailing list Openembedded-devel@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel