I recently tried to cross build the current version of poppler for an embedded ARM system. This was not under the Yocto/OE build environment, but I never could get quite the right cmake config file to get the thing to build. Since I just needed it for the pdftoraster cups filter, I punted and built ghostscript instead. cmake may be fine for native builds, but at least in this case, it was a pain to use for cross-compilation.
-Bill On Tue, Apr 3, 2018 at 8:28 PM, Andreas Müller <schnitzelt...@gmail.com> wrote: > On Wed, Apr 4, 2018 at 3:32 AM, akuster808 <akuster...@gmail.com> wrote: >> Andreas, >> >> >> >> On 04/03/2018 04:15 PM, Andreas Müller wrote: >>> Not convinced that I'll get support at poppler project. Let's see what >>> autobuilder says. If it fails, please unroll back to 0.57.0 - I am sure >>> that disable glib causes trouble for evince. >> >> this didn't make it into the current world build. I built it @ home a >> getting the same errors: >> >> | >> /build/build_artifacts/master/tmp-glibc/work/core2-64-oe-linux/poppler/0.63.0-r0/recipe-sysroot-native/usr/bin/x86_64-oe-linux/../../libexec/x86_64-oe-linux/gcc/x86_64-oe-linux/7.3.0/ld: >> warning: libpoppler.so.74, needed by ./libpoppler-glib.so, not found >> (try using -rpath or -rpath-link) >> >> - armin > Thanks Armin for quick response. As written - I suggest to keep > poppler at 0.57.0 and forget the updates for a while. > > Sigh - from the moment I saw the announcement that poppler changes > from autotools to cmake I thought there might be trouble is ahead. Now > I know. > > Andreas > -- > _______________________________________________ > Openembedded-devel mailing list > Openembedded-devel@lists.openembedded.org > http://lists.openembedded.org/mailman/listinfo/openembedded-devel -- _______________________________________________ Openembedded-devel mailing list Openembedded-devel@lists.openembedded.org http://lists.openembedded.org/mailman/listinfo/openembedded-devel