next failure - https://errors.yoctoproject.org/Errors/Details/738022/
it happens with clang because it has enabled more diagnostics as errors. I think you need to add #include <sys/uio.h> in the failing c files. Thanks -Khem On Thu, Sep 21, 2023 at 12:10 AM Pawel Langowski <pawel.langow...@3mdeb.com> wrote: > > Recipe for TAYGA - an out-of-kernel stateless NAT64 implementation for Linux > > Signed-off-by: Pawel Langowski <pawel.langow...@3mdeb.com> > --- > .../tayga/files/tayga.conf | 103 ++++++++++++++++++ > .../tayga/files/tayga.service | 12 ++ > .../recipes-connectivity/tayga/tayga_0.9.2.bb | 20 ++++ > 3 files changed, 135 insertions(+) > create mode 100644 > meta-networking/recipes-connectivity/tayga/files/tayga.conf > create mode 100644 > meta-networking/recipes-connectivity/tayga/files/tayga.service > create mode 100644 meta-networking/recipes-connectivity/tayga/tayga_0.9.2.bb > > diff --git a/meta-networking/recipes-connectivity/tayga/files/tayga.conf > b/meta-networking/recipes-connectivity/tayga/files/tayga.conf > new file mode 100644 > index 000000000000..c1b6163a4591 > --- /dev/null > +++ b/meta-networking/recipes-connectivity/tayga/files/tayga.conf > @@ -0,0 +1,103 @@ > +# > +# Sample configuration file for TAYGA 0.9.2 > +# > +# Modify this to use your own addresses!! > +# > + > +# > +# TUN device that TAYGA will use to exchange IPv4 and IPv6 packets with the > +# kernel. You may use any name you like, but `nat64' is recommended. > +# > +# This device may be created before starting the tayga daemon by running > +# `tayga --mktun`. This allows routing and firewall rules to be set up prior > +# to commencement of packet translation. > +# > +# Mandatory. > +# > +tun-device nat64 > + > +# > +# TAYGA's IPv4 address. This is NOT your router's IPv4 address! TAYGA > +# requires its own address because it acts as an IPv4 and IPv6 router, and > +# needs to be able to send ICMP messages. TAYGA will also respond to ICMP > +# echo requests (ping) at this address. > +# > +# This address can safely be located inside the dynamic-pool prefix. > +# > +# Mandatory. > +# > +ipv4-addr 192.168.254.1 > + > +# > +# TAYGA's IPv6 address. This is NOT your router's IPv6 address! TAYGA > +# requires its own address because it acts as an IPv4 and IPv6 router, and > +# needs to be able to send ICMP messages. TAYGA will also respond to ICMP > +# echo requests (ping6) at this address. > +# > +# You can leave ipv6-addr unspecified and TAYGA will construct its IPv6 > +# address using ipv4-addr and the NAT64 prefix. > +# > +# Optional if the NAT64 prefix is specified, otherwise mandatory. It is also > +# mandatory if the NAT64 prefix is 64:ff9b::/96 and ipv4-addr is a private > +# (RFC1918) address. > +# > +#ipv6-addr 2001:db8:1::2 > +ipv6-addr fdaa:bb:1::1 > + > +# > +# The NAT64 prefix. The IPv4 address space is mapped into the IPv6 address > +# space by prepending this prefix to the IPv4 address. Using a /96 prefix is > +# recommended in most situations, but all lengths specified in RFC 6052 are > +# supported. > +# > +# This must be a prefix selected from your organization's IPv6 address space > +# or the Well-Known Prefix 64:ff9b::/96. Note that using the Well-Known > +# Prefix will prohibit IPv6 hosts from contacting IPv4 hosts that have > private > +# (RFC1918) addresses, per RFC 6052. > +# > +# The NAT64 prefix need not be specified if all required address mappings are > +# listed in `map' directives. (See below.) > +# > +# Optional. > +# > +##prefix 2001:db8:1:ffff::/96 > +prefix 64:ff9b::/96 > + > +# > +# Dynamic pool prefix. IPv6 hosts which send traffic through TAYGA (and do > +# not correspond to a static map or an IPv4-translatable address in the NAT64 > +# prefix) will be assigned an IPv4 address from the dynamic pool. Dynamic > +# maps are valid for 124 minutes after the last matching packet is seen. > +# > +# If no unassigned addresses remain in the dynamic pool (or no dynamic pool > is > +# configured), packets from unknown IPv6 hosts will be rejected with an ICMP > +# unreachable error. > +# > +# Optional. > +# > +dynamic-pool 192.168.254.0/24 > + > +# > +# Persistent data storage directory. The dynamic.map file, which saves the > +# dynamic maps that are created from dynamic-pool, is stored in this > +# directory. Omit if you do not need these maps to be persistent between > +# instances of TAYGA. > +# > +# Optional. > +# > +data-dir /var/spool/tayga > + > +# > +# Establishes a single-host map. If an IPv6 host should be consistently > +# reachable at a specific IPv4 address, the mapping can be specified in a > +# `map' directive. (IPv6 hosts numbered with an IPv4-translatable address do > +# not need map directives.) > +# > +# IPv4 addresses specified in the `map' directive can safely be located > inside > +# the dynamic-pool prefix. > +# > +# Optional. > +# > +#map 192.168.5.42 2001:db8:1:4444::1 > +#map 192.168.5.43 2001:db8:1:4444::2 > +#map 192.168.255.2 2001:db8:1:569::143 > diff --git a/meta-networking/recipes-connectivity/tayga/files/tayga.service > b/meta-networking/recipes-connectivity/tayga/files/tayga.service > new file mode 100644 > index 000000000000..0bffeb92a501 > --- /dev/null > +++ b/meta-networking/recipes-connectivity/tayga/files/tayga.service > @@ -0,0 +1,12 @@ > +[Unit] > +SourcePath=/usr/sbin/tayga > +Description=LSB: userspace NAT64 > + > +[Service] > +Type=forking > +ExecStart=/usr/sbin/tayga -d --config /etc/tayga.conf > +RemainAfterExit=yes > +TimeoutStopSec=infinity > + > +[Install] > +WantedBy=multi-user.target > diff --git a/meta-networking/recipes-connectivity/tayga/tayga_0.9.2.bb > b/meta-networking/recipes-connectivity/tayga/tayga_0.9.2.bb > new file mode 100644 > index 000000000000..044a1781148e > --- /dev/null > +++ b/meta-networking/recipes-connectivity/tayga/tayga_0.9.2.bb > @@ -0,0 +1,20 @@ > +LICENSE = "GPL-2.0-only" > +LIC_FILES_CHKSUM = "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f" > + > +SRC_URI = " \ > + http://www.litech.org/tayga/tayga-${PV}.tar.bz2 \ > + file://tayga.conf \ > + file://tayga.service \ > + " > +SRC_URI[sha256sum] = > "2b1f7927a9d2dcff9095aff3c271924b052ccfd2faca9588b277431a44f0009c" > + > +SYSTEMD_PACKAGES = "${PN}" > +SYSTEMD_SERVICE:${PN} = "tayga.service" > + > +do_install:append() { > + install -m 0644 ${WORKDIR}/tayga.conf ${D}${sysconfdir}/tayga.conf > + install -d ${D}${systemd_unitdir}/system/ > + install -m 0644 ${WORKDIR}/tayga.service ${D}${systemd_unitdir}/system/ > +} > + > +inherit autotools systemd > -- > 2.41.0 > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#105071): https://lists.openembedded.org/g/openembedded-devel/message/105071 Mute This Topic: https://lists.openembedded.org/mt/101495345/21656 Group Owner: openembedded-devel+ow...@lists.openembedded.org Unsubscribe: https://lists.openembedded.org/g/openembedded-devel/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
