2009/4/2 Stefan Schmidt <ste...@datenfreihafen.org>: > I played with it for some hours. Did not get it running so far. > > I'm using your binaries here so we have a reference. concole-image is on th > sd, > qtopia inside it's home /opt/Qtopia. > > No gen-blob flashed here, but I boot up the following way: > > boot_usb setflag usb > boot_usb gen-blob 0 > boot_usb zImage-1238531469 1742 > > Once the image was up I re-connected usb and was able to log in over usb. > > Folling your instructions falied to start qtopia as the mux devices haven't > been > there. (Funny that it segfaults on this tho)
if you can`t open mux, maby boot was too long, so it paniced. you can try to start qpe with export QTOPIA_PHONE_DUMMY=1 this will disable using mux using fake gsm unstead. > I installed ezxd from here: > http://www.angstrom-distribution.org/feeds/2008/ipk/glibc/armv5te/base/ezxd_0.0+svnr2074-r4.1_armv5te.ipk > > And now it becomes nasty. After I installation and reboot I can see that ezxd > does it work as the mux kernel driver prints out his debug about mux using. > While doing this, the last line is still mux debug, the screen fades out > white. > > On usb re-connect my host still thinks there is something but fails to work > with > it. White screen and the usb behaviour smeels like a kernel problem for me. > > Did you have the same problem? i didn`t try to work with mux without flashing gen-blob >Did you use a different ezxd package or > something? i`m not using ezxd at all. -- wbr, Ilya ICQ: none, Jabber: ilya.muro...@jabber.ru