Factor out the 'canpower' condition into a dedicated function in order
to avoid repetition and to make changing the condition easier.

Signed-off-by: Antonio Ospite <osp...@studenti.unina.it>
---
 drivers/mmc/host/mmc_spi.c |   18 ++++++++++--------
 1 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 7c1e16a..49f5725 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -152,6 +152,10 @@ struct mmc_spi_host {
        dma_addr_t              ones_dma;
 };
 
+static inline int mmc_spi_canpower(struct mmc_spi_host *host)
+{
+       return host->pdata && host->pdata->setpower;
+}
 
 /****************************************************************************/
 
@@ -1187,19 +1191,16 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, 
struct mmc_ios *ios)
        struct mmc_spi_host *host = mmc_priv(mmc);
 
        if (host->power_mode != ios->power_mode) {
-               int             canpower;
-
-               canpower = host->pdata && host->pdata->setpower;
 
                dev_dbg(&host->spi->dev, "mmc_spi: power %s (%d)%s\n",
                                mmc_powerstring(ios->power_mode),
                                ios->vdd,
-                               canpower ? ", can switch" : "");
+                               mmc_spi_canpower(host) ? ", can switch" : "");
 
                /* switch power on/off if possible, accounting for
                 * max 250msec powerup time if needed.
                 */
-               if (canpower) {
+               if (mmc_spi_canpower(host)) {
                        switch (ios->power_mode) {
                        case MMC_POWER_OFF:
                        case MMC_POWER_UP:
@@ -1223,7 +1224,8 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct 
mmc_ios *ios)
                 *   - MOSI low comes from writing zero
                 *   - Chipselect is usually active low...
                 */
-               if (canpower && ios->power_mode == MMC_POWER_OFF) {
+               if (mmc_spi_canpower(host) &&
+                   ios->power_mode == MMC_POWER_OFF) {
                        int mres;
                        u8 nullbyte = 0;
 
@@ -1399,7 +1401,7 @@ static int mmc_spi_probe(struct spi_device *spi)
                dev_warn(&spi->dev, "ASSUMING 3.2-3.4 V slot power\n");
                mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
        }
-       if (host->pdata && host->pdata->setpower) {
+       if (mmc_spi_canpower(host)) {
                host->powerup_msecs = host->pdata->powerup_msecs;
                if (!host->powerup_msecs || host->powerup_msecs > 250)
                        host->powerup_msecs = 250;
@@ -1459,7 +1461,7 @@ static int mmc_spi_probe(struct spi_device *spi)
                        host->dma_dev ? "" : ", no DMA",
                        (host->pdata && host->pdata->get_ro)
                                ? "" : ", no WP",
-                       (host->pdata && host->pdata->setpower)
+                       mmc_spi_canpower(host)
                                ? "" : ", no poweroff",
                        (mmc->caps & MMC_CAP_NEEDS_POLL)
                                ? ", cd polling" : "");
-- 
1.7.4.4


Reply via email to