Restarting the iscsi service did nothing, but I wiped the volumes and recreated them with lowercase labels and now I can connect fine. Thank you both for your assistance.
-----Original Message----- From: Noli Rafallo [mailto:[EMAIL PROTECTED] Sent: March 30, 2006 11:16 PM To: 'Rafiu Fakunle'; Ryan Vaillancourt Cc: [email protected] Subject: RE: [OF-users] iSCSI config? I see the problem, you should not use capital letters. PV, iSCSI target should be in lowercase. At least that's what solved my problem -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rafiu Fakunle Sent: Friday, March 31, 2006 11:57 AM To: Ryan Vaillancourt Cc: [email protected] Subject: Re: [OF-users] iSCSI config? Hi Ryan, Try restarting the iSCSI service after creating an iSCSI volume. I know this works and others on the list have managed to get it functional too. Cheerio, Rafiu. Ryan Vaillancourt wrote: > > I'm having the same issue Jan was having. > > I get "the target name is not found or is marked as hidden from login" > when trying to log on to my Openfiler box. > > I have installed the MS iSCSI Software Initiator Version 2.01, and > have tried 2.0 as well. > > > *My status page just says: Open sessions for iSCSI target > *iqn.2006-01.com.openfiler:iSCSI.iSCSI > > There aren't any more updates available for me to install right now > and I have tried rebooting, and recreating the volumes several times. > > Jan apparently reinstalled, but I'm kinda tired of reinstalling > Openfiler now. The last reinstall helped me fix my raid issue though. > > Any other ideas? > > ---Original Message---- > > Hi, > > I did the update, but still no luck.... > > Then, I started thinking (finally....) I installed the system the M$ > way: boot, next, next, next, finish. > So, I upgraded my previous install :-( > That's probably where some things got corrupted! I did a fresh install, > and now everything works! > > That is, with one exception: the swap partition on sdb wasn't deleted > during teh install, although I did select for the install to delete all > partitions.... > > Running without swap now....., but with iSCSI! > > Thanx for a great piece of work and fantastic support.... > > > Jan. > > -----Oorspronkelijk bericht----- > Van: Rafiu Fakunle [mailto:rafiu.fakunle at xinit.com <https://lists.openfiler.com/mailman/listinfo/openfiler-users>] > Verzonden: woensdag 8 maart 2006 19:15 > Aan: Jan A. Boezeman > CC: openfiler-users at lists.openfiler.com <https://lists.openfiler.com/mailman/listinfo/openfiler-users> > Onderwerp: Re: [OF-users] iSCSI config? > > Hi Jan, > > I tested this on Windows XP and it works fine. > > I used version 2.0 of MS iscsi initiator.. are you using 2.0 or 1.06? > > Cheerio, > > Rafiu. > > PS, please run yum update on the system as we've released some critical > patches. > > > > Jan A. Boezeman wrote: > >/ / > >/ Rafiu,/ > >/ / > >/ / > >/ / > >/ this is the screen I get where I can choose a target:/ > >/ / > >/ If I try the log on button, this is the message I get:/ > >/ / > >/ / > >/ / > >/ Hope this helps,/ > >/ / > >/ Jan/ > >/ / > >/ / > >/ / > >/ -----Oorspronkelijk bericht-----/ > >/ Van: rafiu [mailto:rafiu.fakunle at xinit.com <https://lists.openfiler.com/mailman/listinfo/openfiler-users>]/ > >/ Verzonden: woensdag 8 maart 2006 17:13/ > >/ Aan: Jan A. Boezeman/ > >/ CC: openfiler-users at lists.openfiler.com <https://lists.openfiler.com/mailman/listinfo/openfiler-users>/ > >/ Onderwerp: Re: [OF-users] iSCSI config?/ > >/ / > >/ Hi Jan,/ > >/ / > >/ Can you give a bit more detail about your setup?/ > >/ / > >/ There's an iSCSI status page that gives an overview of configured LUNs/ > > >/ and their connections./ > >/ / > >/ Could you screenshot that page and also tell us how you're trying to / > >/ connect from the MS initiator.../ > >/ / > >/ / > >/ Cheers,/ > >/ / > >/ Rafiu./ > >/ / > >/ / > >/ Jan A. Boezeman wrote:/ > >/ / > >/ > Hi,/ > >/ > / > >/ > I'm trying to get iSCSI to work on the beta, but I get stuck when I/ > >/ > try to use the M$ iSCSI Initiator./ > >/ > It keeps telling me:/ > >/ > "Target name is not found or is marked as hidden from login"/ > >/ > / > >/ > Any ideas? In the web GUI there isn't much to configure..../ > >/ > / > >/ > TIA,/ > >/ > / > >/ > Jan/ > >/ >/ > >/ / > >/---------------------------------------------------------------------- -/ > - > >/ >/ > >/ >_______________________________________________/ > >/ >Openfiler-users mailing list/ > >/ >Openfiler-users at lists.openfiler.com <https://lists.openfiler.com/mailman/listinfo/openfiler-users>/ > >/ >https://lists.openfiler.com/mailman/listinfo/openfiler-users/ > >/ > / > >/ >/ > >/ / > > > ------------------------------------------------------------------------ > size=2 width="100%" align=center> > > * Previous message: [OF-users] No Volumes > <https://lists.openfiler.com/pipermail/openfiler-users/2006-March/001342 .htm l> > > ------------------------------------------------------------------------ > > _______________________________________________ > Openfiler-users mailing list > [email protected] > https://lists.openfiler.com/mailman/listinfo/openfiler-users > _______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users _______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
