Hi David, Karan On Sat, 2006-06-03 at 09:43 +0100, Karanbir Singh wrote: > David J. Malan wrote: > > Hi all, > > > > I went ahead and set up OpenFiler 1.1.1 on an old Pentium III with two 250GB > > PATA hard drives (one master, one slave), and, with the OpenFiler installer, > > created 4 RAID-1 devices using the two drives as follows: > > > > md0: /boot [100 MB] > > md1: / [4096 MB] > > md2: swap [2048 MB] > > md3: LVM [rest of space] > > grub does not handle s/w raid for /boot in its present form, there are a > few patches available that bring this functionality in, but we're not > rolling that in till there has been enough testing. >
This is slightly incorrect. The functionality is there. When you configure an MD device for /boot in Anaconda, and say it's a RAID-1 mirror device, it sets up grub on both the member disks. Of course, the BIOS only boots one of them. Mukund _______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
