Thanks for the help so far Bill - looked for the older kernel, but mine only goes back to 2.6.19.4-0.1
So, throwing this one open to the Openfiler community - can anyone help with downgrading the kernel to 2.6.17.14-0.4 so that my Openfiler/rPath install can use the full capabilities of my hardware? Openfiler version is 2.2.r1210-1-1 Looking at /lib/modules, the following directories are present: 2.6.17.11-1.1.smp.x86.i686.cmov 2.6.17.11-1.1.x86.i686.cmov 2.6.17.14-0.1.smp.x86.i686.cmov 2.6.17.14-0.1.x86.i686.cmov 2.6.17.14-0.2.x86.i686.cmov 2.6.17.14-0.3.x86.i686.cmov 2.6.17.14-0.4.smp.x86.i686.cmov 2.6.17.14-0.4.x86.i686.cmov 2.6.19.4-0.1.smp.x86.i686.cmov 2.6.19.4-0.1.x86.i686.cmov 2.6.19.7-0.1.smp.x86.i686.cmov 2.6.19.7-0.1.x86.i686.cmov All of the 2.6.17 directories are empty. Looking at /boot I have the following: config-2.6.19.4-0.1.smp.x86.i686.cmov initrd-2.6.19.7-0.1.x86.i686.cmov.img vmlinux-2.6.19.7-0.1.smp.x86.i686.cmov config-2.6.19.4-0.1.x86.i686.cmov lost+found vmlinux-2.6.19.7-0.1.x86.i686.cmov config-2.6.19.7-0.1.smp.x86.i686.cmov System.map-2.6.19.4-0.1.smp.x86.i686.cmov vmlinuz-2.6.19.4-0.1.smp.x86.i686.cmov config-2.6.19.7-0.1.x86.i686.cmov System.map-2.6.19.4-0.1.x86.i686.cmov vmlinuz-2.6.19.4-0.1.x86.i686.cmov grub System.map-2.6.19.7-0.1.smp.x86.i686.cmov vmlinuz-2.6.19.7-0.1.smp.x86.i686.cmov initrd-2.6.19.4-0.1.smp.x86.i686.cmov.img System.map-2.6.19.7-0.1.x86.i686.cmov vmlinuz-2.6.19.7-0.1.x86.i686.cmov initrd-2.6.19.4-0.1.x86.i686.cmov.img vmlinux-2.6.19.4-0.1.smp.x86.i686.cmov initrd-2.6.19.7-0.1.smp.x86.i686.cmov.img vmlinux-2.6.19.4-0.1.x86.i686.cmov That's all of the info I can think to give to help with helping me - if there is anything else, please let me know, and I'll post it Regards Frank > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > Behalf Of Bill Pye > Sent: 26 March 2007 19:01 > To: [email protected] > Subject: Re: [OF-users] Dual CPU system, system status shows single > > Hi Frank > > You'll probably find it's still in your grub config file, > does it show as an option on the screen when you boot? Have a > look at it by doing cat /boot/grub/grub.conf - you should > find the 2.6.17 kernel is still listed, if it is then just > point the 'default=x' to the entry for that kernel. > > I'm still fairly new to linux so if the kernel isn't there > then I'm not sure how to roll-back or install an older kernel > especially using conary. > > Regards > > Bill > > > > > ----- Original Message ----- > From: "Frank Collingwood" <[EMAIL PROTECTED]> > To: [email protected] > Sent: 26 March 2007 04:30:14 o'clock (GMT+0100) Europe/Berlin > Subject: RE: [OF-users] Dual CPU system, system status shows single > > Hi Bill > > By the looks of things I'm running 2.6.19.7-0.1 > > In order to go back to 2.6.17.14-0.4, what would I need to do? > > Regards > > Frank > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On > Behalf Of Bill > > Pye > > Sent: 26 March 2007 13:26 > > To: [email protected] > > Subject: Re: [OF-users] Dual CPU system, system status shows single > > > > By 'hung' do you mean an error during boot? There was a > kernel update > > a short while back that caused a problem with my system, I can't > > remember what the problem was but I went back to using the previous > > kernel. The current kernel I'm using is 2.6.17.14-0.4, I'm > also using > > a dual AMD MP2400 system. I think I mentioned it in the > forums and the > > problem was kicked back to rPath for resolution. Is that the kernel > > you're using? > > > > Regards > > > > Bill > > > > > > > > ----- Original Message ----- > > From: "Frank Collingwood" <[EMAIL PROTECTED]> > > To: [email protected] > > Sent: 26 March 2007 02:56:20 o'clock (GMT+0100) Europe/Berlin > > Subject: RE: [OF-users] Dual CPU system, system status shows single > > > > > > Tried to boot using the SMP kernel, and it hung after > unpacking the > > kernel. > > > > Back to the drawing board........ > > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On Behalf Of > > > Frank Collingwood > > > Sent: 26 March 2007 00:49 > > > To: [email protected] > > > Subject: RE: [OF-users] Dual CPU system, system status > shows single > > > > > > > > > No idea - I will reboot using SMP and see what happens > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:[EMAIL PROTECTED] On > > > Behalf Of Bill > > > > Pye > > > > Sent: 26 March 2007 00:46 > > > > To: [email protected] > > > > Subject: Re: [OF-users] Dual CPU system, system status > > shows single > > > > > > > > My obvious question would be, what kernel have you > booted from? I > > > > think OF has a tendency to change grub to use the single > > processor > > > > kernel when it updates itself even if you previously > used the SMP > > > > kernel. > > > > > > > > Regards > > > > > > > > Bill > > > > > > > > ----- Original Message ----- > > > > From: "Frank Collingwood" <[EMAIL PROTECTED]> > > > > To: [email protected] > > > > Sent: 25 March 2007 14:40:49 o'clock (GMT+0100) Europe/Berlin > > > > Subject: [OF-users] Dual CPU system, system status shows single > > > > > > > > Another Q > > > > > > > > I'm running a dual AMD MP1600 system. The Status -> System > > > information > > > > page shows the box as being single CPU. Any ideas? > > > > > > > > _______________________________________________ > > > > Openfiler-users mailing list > > > > [email protected] > > > > https://lists.openfiler.com/mailman/listinfo/openfiler-users > > > > > > > > _______________________________________________ > > > > Openfiler-users mailing list > > > > [email protected] > > > > https://lists.openfiler.com/mailman/listinfo/openfiler-users > > > > > > > > > > _______________________________________________ > > > Openfiler-users mailing list > > > [email protected] > > > https://lists.openfiler.com/mailman/listinfo/openfiler-users > > > > > > > _______________________________________________ > > Openfiler-users mailing list > > [email protected] > > https://lists.openfiler.com/mailman/listinfo/openfiler-users > > > > _______________________________________________ > > Openfiler-users mailing list > > [email protected] > > https://lists.openfiler.com/mailman/listinfo/openfiler-users > > > > _______________________________________________ > Openfiler-users mailing list > [email protected] > https://lists.openfiler.com/mailman/listinfo/openfiler-users > > _______________________________________________ > Openfiler-users mailing list > [email protected] > https://lists.openfiler.com/mailman/listinfo/openfiler-users > _______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
