missed that part of the single boot drive... ________________________________
From: dave johnson [mailto:[EMAIL PROTECTED] Sent: Friday, March 30, 2007 10:50 AM To: Smith, Al; [EMAIL PROTECTED]; [email protected] Subject: Re: [OF-users] Reinstall Help as he stated, the boot drive was a single IDE drive. try putting the drive in the freezer for a 1/2hr then try spinning it up and getting the config off it quickly :) -=dave ----- Original Message ----- From: Smith, Al <mailto:[EMAIL PROTECTED]> To: [EMAIL PROTECTED] ; [email protected] Sent: Friday, March 30, 2007 4:01 AM Subject: Re: [OF-users] Reinstall Help One thing you could try to do is boot into recovery mode and try to get the configs and everything from the disk in the array. I am surprised that if you were in a raid config that your system crashed. You should have been able to replace the drive and resync your mirrors. Al Smith Network and Systems Administrator [EMAIL PROTECTED] (610) 968-1239 (o) (484) 886-6216 (c) -----Original Message----- From: [EMAIL PROTECTED] To: [email protected] Sent: Fri Mar 30 05:20:39 2007 Subject: [OF-users] Reinstall Help Hi All, I have openfiler running on four 250gig drives in a software array, and a single ide drive to boot from. This morning the ide drive died, so I've reinstalled openfiler with a new drive, I hadn't backup the configuration which was one iscsi of 250gig and the rest as a shared drive. Is there a way of recovering the raid as that wasn't damaged, its reporting that all the space is used. Best regards Daniel Clegg ________________________________ _______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
_______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
