Udayan Singh wrote:
Hi All,
We have been trying to install iscsi initiator on open filer (version 2.1)
We executed the following command:
iscsiadm create initiator-node <initiator name> <friendly name>
but we are getting the following error:
configuration error: Cannot connect to iSCSI daemon
Any inputs on above would be great.
From an old post of mine to the list. Should still be valid.
Steps to get iscsi initiator going.
------------------------------------
1) echo InitiatorName=iqn.1987-05.com.cisco.
01.a1ad5447905f8e93a778ddfefedb233 > /etc/initiatorname.iscsi
2) service open-iscsi start
Then either (manual)
------------------
3.0) iscsiadm -m discovery -t st -p <ip.of.target>
e.g
[EMAIL PROTECTED] ~]# iscsiadm -m discovery -t st -p 192.168.254.10
[1a51c8] 192.168.254.10:3260,1 iqn.2006-01.com.openfiler:dataadd.iscsi
3.1) iscsiadm -m node -r 1a51c8 --login
or (auto)
----------
3.0) conary update open-iscsi
3.1) iscsi_discovery
To have it start on boot:
chkconfig open-iscsi on
R.
tia,
Udayan
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
_______________________________________________
Openfiler-users mailing list
[email protected]
https://lists.openfiler.com/mailman/listinfo/openfiler-users
_______________________________________________
Openfiler-users mailing list
[email protected]
https://lists.openfiler.com/mailman/listinfo/openfiler-users
