I just installed openfiler 2.2 tonight to see if it'd be good to use for my home network. I really like it, but I'm running into a showstopper problem. I have a USB harddrive enclosure that worked perfectly in Ubuntu 6.10, but during installation of openfiler I got weird "cannot read /dev/sda" errors in disk druid, and then later after booting openfiler, I cannot even fdisk that drive:
[EMAIL PROTECTED] ~]# fdisk /dev/sda Unable to read /dev/sda dmesg shows: sd 0:0:0:0: SCSI error: return code = 0x10070000 end_request: I/O error, dev sda, sector 0 printk: 129 messages suppressed. Buffer I/O error on device sda, logical block 0 Buffer I/O error on device sda, logical block 1 Buffer I/O error on device sda, logical block 2 Buffer I/O error on device sda, logical block 3 sd 0:0:0:0: SCSI error: return code = 0x10070000 end_request: I/O error, dev sda, sector 0 Buffer I/O error on device sda, logical block 0 I doubt the drive is bad, it worked fine 10 minutes before in Ubuntu I installed openfiler. Any ideas? Thanks, Mike _______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
