Thanks Dave, I have a 2Gbps Qlogic HBA installed. I'm going to give the instructions Rafiu linked to a try and see if I can make some headway with this, i'm proably missing a step somewhere.
Eric On Jan 20, 2008 2:23 PM, Dave Johnson <[EMAIL PROTECTED]> wrote: > I personally didn't have any experience with the FC target mode driver and > even after a week of head-pounding while trying to use those same > instructions below, couldn't get it to work. I finally pulled the rip > cord... Rafiu was nice enough to remote into the box and find the prob and > according to him, after his changes, FC target mode was working (this was > on > a 4Gbps Qlogic HBA.) > > Unfortunately that was only hours before the NAS gateway I had for > setup/testing got deployed to production so I had futzed away my window of > opportunity trying to get the thing to work. I never even got to see if > the > NAS gateway could discover the OF-presented LUNs. Of course, in theory it > should work ;) > > I'll see if I can try and find the changes that were required. I > certainly > don't remember but I did keep that boot drive lying around in case I had > another opp to test it... It just hasn't happened. Ship ran too tight > around here I guess :) > > -=dave >
_______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
