Hmm, did esx connect to it and show no files, or did it ask you if you wanted to initialize the storage?
-Aaron On Wed, Apr 16, 2008 at 6:27 PM, Vasiliy Boulytchev < [EMAIL PROTECTED]> wrote: > Gents, > Imagine the following scenario: > > > - ESX 3.5 sees iSCSI lun from Openfiler (2.2) > - Create a snapshot of this logical volume like: > lvcreate -L200G -s -n esxsnapshot /dev/volumegroup/storage > - Replicate this snapshot via dd on another volume (which is also > being served by iSCSI via OpenFiler) > dd bs=8M if=/dev/volumegroup/esxsnapshot of=/dev/volumegroup/restore > - /dev/volumegroup/restore and /dev/volumegroup/storage are of > identical size, and were created in the same manner via the Openfiler gui. > - This is being done for backup/restore purposes... > > Now, when I rescan the ESX Storage adapter (after tweaking ietd.conf on > Openfiler and increasing LUN ID), I see the "restore" iscsi LUN, however, > ESX thinks its empty. > > Where is the mistake? > > THANKS!!! > > Vasiliy > > _______________________________________________ > Openfiler-users mailing list > [email protected] > https://lists.openfiler.com/mailman/listinfo/openfiler-users > >
_______________________________________________ Openfiler-users mailing list [email protected] https://lists.openfiler.com/mailman/listinfo/openfiler-users
