Yes,I tried the command “ ./nox_core -v -i ptcp:6633 pyswitch ” ,and ping can work well Thank you~
2011-04-26 linbo 发件人: Kyriakos Zarifis 发送时间: 2011-04-26 16:11:35 收件人: linbo 抄送: nox-dev; openflow-discuss 主题: Re: [nox-dev] how to add a flow entry through nox to the openflow switch Hi, which NOX components are you running? You need do have some component(s) that will install flow entries on the switch for the ping to go through have a look here: http://noxrepo.org/noxwiki/index.php/FAQ#What_does_the_traversal_of_a_packet_through_a_NOX_controlled_network_look_like.3F 2011/4/26 linbo <li...@csnet1.cs.tsinghua.edu.cn> Hi ,all I want to verify the openflow and controller work well or not,but I get something wrong. here is my problem: 1、the openflow switch has connetected to nox ,and the topology is as follow: openflow-controller:eth0 -> 192.168.1.1/24 openflow-switch:eth0 -> 192.168.1.2/24 openflow-switch:eth1 -> no IP (would act as a switch port) openflow-switch:eth2 -> no IP (would act as a switch port) openflow-host1:eth0 -> 192.168.2.1/24 openflow-host2:eth0 -> 192.168.2.2/24 2、when i ping host1 from host2 ,I can‘t see any ping replies coming. i check out the flow table of the switch ,and the flow table of the swtich is empty。 so how can I add a flow entry through nox to the openflow switch to let the ping work welll Thank you! 2011-04-26 linbo _______________________________________________ nox-dev mailing list nox-...@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss