On Thu, May 17, 2012 at 04:09:37PM -0400, Ryan White wrote: > Is there a table anywhere with all the openflow error packet types and codes > explaining what they mean? I looked online with google and in the openflow > wiki but I couldn't find it. > > (I'm getting type=45250 code=0 in case anyone knows what that is)
That's an Open vSwitch extension error code. The format is defined in include/openflow/nicira-ext.h: /* Nicira vendor-specific error messages extension. * * OpenFlow 1.0 has a set of predefined error types (OFPET_*) and codes (which * are specific to each type). It does not have any provision for * vendor-specific error codes, and it does not even provide "generic" error * codes that can apply to problems not anticipated by the OpenFlow * specification authors. * * This extension attempts to address the problem by adding a generic "error * vendor extension". The extension works as follows: use NXET_VENDOR as type * and NXVC_VENDOR_ERROR as code, followed by struct nx_vendor_error with * vendor-specific details, followed by at least 64 bytes of the failed * request. * * It would be better to have a type-specific vendor extension, e.g. so that * OFPET_BAD_ACTION could be used with vendor-specific code values. But * OFPET_BAD_ACTION and most other standardized types already specify that * their 'data' values are (the start of) the OpenFlow message being replied * to, so there is no room to insert a vendor ID. * * Currently this extension is only implemented by Open vSwitch, but it seems * like a reasonable candidate for future standardization. */ /* This is a random number to avoid accidental collision with any other * vendor's extension. */ #define NXET_VENDOR 0xb0c2 /* ofp_error msg 'code' values for NXET_VENDOR. */ enum nx_vendor_code { NXVC_VENDOR_ERROR /* 'data' contains struct nx_vendor_error. */ }; /* 'data' for 'type' == NXET_VENDOR, 'code' == NXVC_VENDOR_ERROR. */ struct nx_vendor_error { ovs_be32 vendor; /* Vendor ID as in struct ofp_vendor_header. */ ovs_be16 type; /* Vendor-defined type. */ ovs_be16 code; /* Vendor-defined subtype. */ /* Followed by at least the first 64 bytes of the failed request. */ }; Once you extract the inner type and code, you can look it up in the table in lib/ofp-errors.h. It'll be one of the ones marked "NX" (Nicira extension): enum ofperr { /* Expected duplications. */ /* Expected: 3,5 in OF1.1 means both OFPBIC_BAD_EXPERIMENTER and * OFPBIC_BAD_EXP_TYPE. */ /* ## ------------------ ## */ /* ## OFPET_HELLO_FAILED ## */ /* ## ------------------ ## */ /* OF1.0+(0). Hello protocol failed. */ OFPERR_OFPET_HELLO_FAILED = OFPERR_OFS, /* OF1.0+(0,0). No compatible version. */ OFPERR_OFPHFC_INCOMPATIBLE, /* OF1.0+(0,1). Permissions error. */ OFPERR_OFPHFC_EPERM, /* ## ----------------- ## */ /* ## OFPET_BAD_REQUEST ## */ /* ## ----------------- ## */ /* OF1.0+(1). Request was not understood. */ OFPERR_OFPET_BAD_REQUEST, /* OF1.0+(1,0). ofp_header.version not supported. */ OFPERR_OFPBRC_BAD_VERSION, /* OF1.0+(1,1). ofp_header.type not supported. */ OFPERR_OFPBRC_BAD_TYPE, /* OF1.0+(1,2). ofp_stats_msg.type not supported. */ OFPERR_OFPBRC_BAD_STAT, /* OF1.0+(1,3). Vendor not supported (in ofp_vendor_header or * ofp_stats_msg). */ OFPERR_OFPBRC_BAD_VENDOR, /* OF1.0+(1,4). Vendor subtype not supported. */ OFPERR_OFPBRC_BAD_SUBTYPE, /* OF1.0+(1,5). Permissions error. */ OFPERR_OFPBRC_EPERM, /* OF1.0+(1,6). Wrong request length for type. */ OFPERR_OFPBRC_BAD_LEN, /* OF1.0+(1,7). Specified buffer has already been used. */ OFPERR_OFPBRC_BUFFER_EMPTY, /* OF1.0+(1,8). Specified buffer does not exist. */ OFPERR_OFPBRC_BUFFER_UNKNOWN, /* OF1.1+(1,9). Specified table-id invalid or does not exist. */ OFPERR_OFPBRC_BAD_TABLE_ID, /* OF1.2+(1,10). Denied because controller is slave. */ OFPERR_OFPBRC_IS_SLAVE, /* OF1.2+(1,11). Invalid port. */ OFPERR_OFPBRC_BAD_PORT, /* OF1.2+(1,12). Invalid packet in packet-out. */ OFPERR_OFPBRC_BAD_PACKET, /* NX1.0+(1,256). Invalid NXM flow match. */ OFPERR_NXBRC_NXM_INVALID, /* NX1.0+(1,257). The nxm_type, or nxm_type taken in combination with * nxm_hasmask or nxm_length or both, is invalid or not implemented. */ OFPERR_NXBRC_NXM_BAD_TYPE, /* NX1.0+(1,512). A request specified a nonexistent table ID. */ OFPERR_NXBRC_BAD_TABLE_ID, /* NX1.0+(1,514). The in_port in an ofp_packet_out request is invalid. */ OFPERR_NXBRC_BAD_IN_PORT, /* NX1.0+(1,515). Must-be-zero field had nonzero value. */ OFPERR_NXBRC_MUST_BE_ZERO, /* NX1.0+(1,516). The reason in an ofp_port_status message is not * valid. */ OFPERR_NXBRC_BAD_REASON, /* ## ---------------- ## */ /* ## OFPET_BAD_ACTION ## */ /* ## ---------------- ## */ /* OF1.0+(2). Error in action description. */ OFPERR_OFPET_BAD_ACTION, /* OF1.0+(2,0). Unknown action type. */ OFPERR_OFPBAC_BAD_TYPE, /* OF1.0+(2,1). Length problem in actions. */ OFPERR_OFPBAC_BAD_LEN, /* OF1.0+(2,2). Unknown experimenter id specified. */ OFPERR_OFPBAC_BAD_VENDOR, /* OF1.0+(2,3). Unknown action type for experimenter id. */ OFPERR_OFPBAC_BAD_VENDOR_TYPE, /* OF1.0+(2,4). Problem validating output port. */ OFPERR_OFPBAC_BAD_OUT_PORT, /* OF1.0+(2,5). Bad action argument. */ OFPERR_OFPBAC_BAD_ARGUMENT, /* OF1.0+(2,6). Permissions error. */ OFPERR_OFPBAC_EPERM, /* OF1.0+(2,7). Can't handle this many actions. */ OFPERR_OFPBAC_TOO_MANY, /* OF1.0+(2,8). Problem validating output queue. */ OFPERR_OFPBAC_BAD_QUEUE, /* OF1.1+(2,9). Invalid group id in forward action. */ OFPERR_OFPBAC_BAD_OUT_GROUP, /* OF1.1+(2,10). Action can't apply for this match. */ OFPERR_OFPBAC_MATCH_INCONSISTENT, /* OF1.1+(2,11). Action order is unsupported for the action list in an * Apply-Actions instruction */ OFPERR_OFPBAC_UNSUPPORTED_ORDER, /* OF1.1+(2,12). Actions uses an unsupported tag/encap. */ OFPERR_OFPBAC_BAD_TAG, /* OF1.2+(2,13). Unsupported type in SET_FIELD action. */ OFPERR_OFPBAC_SET_TYPE, /* OF1.2+(2,14). Length problem in SET_FIELD action. */ OFPERR_OFPBAC_SET_LEN, /* OF1.2+(2,15). Bad argument in SET_FIELD action. */ OFPERR_OFPBAC_ARGUMENT, /* NX1.0+(2,256). Must-be-zero action argument had nonzero value. */ OFPERR_NXBAC_MUST_BE_ZERO, /* ## --------------------- ## */ /* ## OFPET_BAD_INSTRUCTION ## */ /* ## --------------------- ## */ /* OF1.1+(3). Error in instruction list. */ OFPERR_OFPET_BAD_INSTRUCTION, /* OF1.1+(3,0). Unknown instruction. */ OFPERR_OFPBIC_UNKNOWN_INST, /* OF1.1+(3,1). Switch or table does not support the instruction. */ OFPERR_OFPBIC_UNSUP_INST, /* OF1.1+(3,2). Invalid Table-ID specified. */ OFPERR_OFPBIC_BAD_TABLE_ID, /* OF1.1+(3,3). Metadata value unsupported by datapath. */ OFPERR_OFPBIC_UNSUP_METADATA, /* OF1.1+(3,4). Metadata mask value unsupported by datapath. */ OFPERR_OFPBIC_UNSUP_METADATA_MASK, /* OF1.1+(3,5). Unknown experimenter id specified. */ OFPERR_OFPBIC_BAD_EXPERIMENTER, /* OF1.1(3,5), OF1.2+(3,6). Unknown instruction for experimenter id. */ OFPERR_OFPBIC_BAD_EXP_TYPE, /* OF1.2+(3,7). Length problem in instructions. */ OFPERR_OFPBIC_BAD_LEN, /* OF1.2+(3,8). Permissions error. */ OFPERR_OFPBIC_EPERM, /* ## --------------- ## */ /* ## OFPET_BAD_MATCH ## */ /* ## --------------- ## */ /* OF1.1+(4). Error in match. */ OFPERR_OFPET_BAD_MATCH, /* OF1.1+(4,0). Unsupported match type specified by the match */ OFPERR_OFPBMC_BAD_TYPE, /* OF1.1+(4,1). Length problem in match. */ OFPERR_OFPBMC_BAD_LEN, /* OF1.1+(4,2). Match uses an unsupported tag/encap. */ OFPERR_OFPBMC_BAD_TAG, /* OF1.1+(4,3). Unsupported datalink addr mask - switch does not support * arbitrary datalink address mask. */ OFPERR_OFPBMC_BAD_DL_ADDR_MASK, /* OF1.1+(4,4). Unsupported network addr mask - switch does not support * arbitrary network address mask. */ OFPERR_OFPBMC_BAD_NW_ADDR_MASK, /* OF1.1+(4,5). Unsupported wildcard specified in the match. */ OFPERR_OFPBMC_BAD_WILDCARDS, /* OF1.1+(4,6). Unsupported field in the match. */ OFPERR_OFPBMC_BAD_FIELD, /* NX1.0(1,258), NX1.1(1,258), OF1.2+(4,7). Unsupported value in a match * field. */ OFPERR_OFPBMC_BAD_VALUE, /* NX1.0(1,259), NX1.1(1,259), OF1.2+(4,8). Unsupported mask specified in * the match, field is not dl-address or nw-address. */ OFPERR_OFPBMC_BAD_MASK, /* NX1.0(1,260), NX1.1(1,260), OF1.2+(4,9). A prerequisite was not met. */ OFPERR_OFPBMC_BAD_PREREQ, /* NX1.0(1,261), NX1.1(1,261), OF1.2+(4,10). A field type was * duplicated. */ OFPERR_OFPBMC_DUP_FIELD, /* OF1.2+(4,11). Permissions error. */ OFPERR_OFPBMC_EPERM, /* ## --------------------- ## */ /* ## OFPET_FLOW_MOD_FAILED ## */ /* ## --------------------- ## */ /* OF1.0(3), OF1.1+(5). Problem modifying flow entry. */ OFPERR_OFPET_FLOW_MOD_FAILED, /* OF1.1+(5,0). Unspecified error. */ OFPERR_OFPFMFC_UNKNOWN, /* OF1.0(3,0). Flow not added because of full tables. */ OFPERR_OFPFMFC_ALL_TABLES_FULL, /* OF1.1+(5,1). Flow not added because table was full. */ OFPERR_OFPFMFC_TABLE_FULL, /* OF1.1+(5,2). Table does not exist */ OFPERR_OFPFMFC_BAD_TABLE_ID, /* OF1.0(3,1), OF1.1+(5,3). Attempted to add overlapping flow with * CHECK_OVERLAP flag set. */ OFPERR_OFPFMFC_OVERLAP, /* OF1.0(3,2), OF1.1+(5,4). Permissions error. */ OFPERR_OFPFMFC_EPERM, /* OF1.1+(5,5). Flow not added because of unsupported idle/hard * timeout. */ OFPERR_OFPFMFC_BAD_TIMEOUT, /* OF1.0(3,3). Flow not added because of non-zero idle/hard timeout. */ OFPERR_OFPFMFC_BAD_EMERG_TIMEOUT, /* OF1.0(3,4), OF1.1+(5,6). Unsupported or unknown command. */ OFPERR_OFPFMFC_BAD_COMMAND, /* OF1.2+(5,7). Unsupported or unknown flags. */ OFPERR_OFPFMFC_BAD_FLAGS, /* OF1.0(3,5). Unsupported action list - cannot process in the order * specified. */ OFPERR_OFPFMFC_UNSUPPORTED, /* NX1.0(3,256), NX1.1(5,256). Generic hardware error. */ OFPERR_NXFMFC_HARDWARE, /* NX1.0(3,257), NX1.1(5,257). A nonexistent table ID was specified in the * "command" field of struct ofp_flow_mod, when the nxt_flow_mod_table_id * extension is enabled. */ OFPERR_NXFMFC_BAD_TABLE_ID, /* ## ---------------------- ## */ /* ## OFPET_GROUP_MOD_FAILED ## */ /* ## ---------------------- ## */ /* OF1.1+(6). Problem modifying group entry. */ OFPERR_OFPET_GROUP_MOD_FAILED, /* OF1.1+(6,0). Group not added because a group ADD attempted to replace * an already-present group. */ OFPERR_OFPGMFC_GROUP_EXISTS, /* OF1.1+(6,1). Group not added because Group specified is invalid. */ OFPERR_OFPGMFC_INVALID_GROUP, /* OF1.1+(6,2). Switch does not support unequal load sharing with select * groups. */ OFPERR_OFPGMFC_WEIGHT_UNSUPPORTED, /* OF1.1+(6,3). The group table is full. */ OFPERR_OFPGMFC_OUT_OF_GROUPS, /* OF1.1+(6,4). The maximum number of action buckets for a group has been * exceeded. */ OFPERR_OFPGMFC_OUT_OF_BUCKETS, /* OF1.1+(6,5). Switch does not support groups that forward to groups. */ OFPERR_OFPGMFC_CHAINING_UNSUPPORTED, /* OF1.1+(6,6). This group cannot watch the watch_port or watch_group * specified. */ OFPERR_OFPGMFC_WATCH_UNSUPPORTED, /* OF1.1+(6,7). Group entry would cause a loop. */ OFPERR_OFPGMFC_LOOP, /* OF1.1+(6,8). Group not modified because a group MODIFY attempted to * modify a non-existent group. */ OFPERR_OFPGMFC_UNKNOWN_GROUP, /* OF1.2+(6,9). Group not deleted because another group is forwarding to it. */ OFPERR_OFPGMFC_CHAINED_GROUP, /* OF1.2+(6,10). Unsupported or unknown group type. */ OFPERR_OFPGMFC_BAD_TYPE, /* OF1.2+(6,11). Unsupported or unknown command. */ OFPERR_OFPGMFC_BAD_COMMAND, /* OF1.2+(6,12). Error in bucket. */ OFPERR_OFPGMFC_OFPGMFC_BAD_BUCKET, /* OF1.2+(6,13). Error in watch port/group. */ OFPERR_OFPGMFC_OFPGMFC_BAD_WATCH, /* OF1.2+(6,14). Permissions error. */ OFPERR_OFPGMFC_OFPGMFC_EPERM, /* ## --------------------- ## */ /* ## OFPET_PORT_MOD_FAILED ## */ /* ## --------------------- ## */ /* OF1.0(4), OF1.1+(7). OFPT_PORT_MOD failed. */ OFPERR_OFPET_PORT_MOD_FAILED, /* OF1.0(4,0), OF1.1+(7,0). Specified port does not exist. */ OFPERR_OFPPMFC_BAD_PORT, /* OF1.0(4,1), OF1.1+(7,1). Specified hardware address does not match the * port number. */ OFPERR_OFPPMFC_BAD_HW_ADDR, /* OF1.1+(7,2). Specified config is invalid. */ OFPERR_OFPPMFC_BAD_CONFIG, /* OF1.1+(7,3). Specified advertise is invalid. */ OFPERR_OFPPMFC_BAD_ADVERTISE, /* OF1.2+(7,4). Permissions error. */ OFPERR_OFPPMFC_EPERM, /* ## ---------------------- ## */ /* ## OFPET_TABLE_MOD_FAILED ## */ /* ## ---------------------- ## */ /* OF1.1+(8). Table mod request failed. */ OFPERR_OFPET_TABLE_MOD_FAILED, /* OF1.1+(8,0). Specified table does not exist. */ OFPERR_OFPTMFC_BAD_TABLE, /* OF1.1+(8,1). Specified config is invalid. */ OFPERR_OFPTMFC_BAD_CONFIG, /* OF1.2+(8,2). Permissions error. */ OFPERR_OFPTMFC_EPERM, /* ## --------------------- ## */ /* ## OFPET_QUEUE_OP_FAILED ## */ /* ## --------------------- ## */ /* OF1.0(5), OF1.1+(9). Queue operation failed. */ OFPERR_OFPET_QUEUE_OP_FAILED, /* OF1.0(5,0), OF1.1+(9,0). Invalid port (or port does not exist). */ OFPERR_OFPQOFC_BAD_PORT, /* OF1.0(5,1), OF1.1+(9,1). Queue does not exist. */ OFPERR_OFPQOFC_BAD_QUEUE, /* OF1.0(5,2), OF1.1+(9,2). Permissions error. */ OFPERR_OFPQOFC_EPERM, /* ## -------------------------- ## */ /* ## OFPET_SWITCH_CONFIG_FAILED ## */ /* ## -------------------------- ## */ /* OF1.1+(10). Switch config request failed. */ OFPERR_OFPET_SWITCH_CONFIG_FAILED, /* OF1.1+(10,0). Specified flags is invalid. */ OFPERR_OFPSCFC_BAD_FLAGS, /* OF1.1+(10,1). Specified len is invalid. */ OFPERR_OFPSCFC_BAD_LEN, /* OF1.2+(10,2). Permissions error. */ OFPERR_OFPSCFC_EPERM, /* ## ------------------------- ## */ /* ## OFPET_ROLE_REQUEST_FAILED ## */ /* ## ------------------------- ## */ /* OF1.2+(11). Controller Role request failed. */ OFPERR_OFPET_ROLE_REQUEST_FAILED, /* OF1.2+(11,0). Stale Message: old generation_id. */ OFPERR_OFPRRFC_STALE, /* OF1.2+(11,1). Controller role change unsupported. */ OFPERR_OFPRRFC_UNSUP, /* NX1.0(1,513), NX1.1(1,513), OF1.2+(11,2). Invalid role. */ OFPERR_OFPRRFC_BAD_ROLE, /* ## ------------------ ## */ /* ## OFPET_EXPERIMENTER ## */ /* ## ------------------ ## */ /* OF1.2+(0xffff). Experimenter error messages. */ OFPERR_OFPET_EXPERIMENTER, }; _______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss