Hi,all,
I install a netfpga card on my pc and tried to connect to a remote controller.
I configured the four ports' ip as
192.168.0.10,192.168.0.11,192.168.0.12,192.168.0.13 and run the command:
./udatapath/ofdatapath --detach punix:/var/run/dp0 -d 004E46324300 -i
nf2c0,nf2c1,nf2c2,nf2c3
and got the following:
Nov 23 21:58:26|00001|datapath|ERR|nf2c0 device has assigned IP address
192.168.0.10
Nov 23 21:58:26|00002|datapath|ERR|nf2c0 device has assigned IPv6 address
fe80::24e:46ff:fe32:4300
RTNETLINK answers: No such file or directory
Nov 23 21:58:26|00003|datapath|ERR|nf2c1 device has assigned IP address
192.168.0.11
Nov 23 21:58:26|00004|datapath|ERR|nf2c1 device has assigned IPv6 address
fe80::24e:46ff:fe32:4301
RTNETLINK answers: No such file or directory
Nov 23 21:58:26|00005|datapath|ERR|nf2c2 device has assigned IP address
192.168.0.12
RTNETLINK answers: No such file or directory
Nov 23 21:58:26|00006|datapath|ERR|nf2c3 device has assigned IP address
192.168.0.13
RTNETLINK answers: No such file or directory
Could anyone tell me why it seems an error after I assigned ip to the port?And
what does "RTNETLINK answers: No such file or directory"mean exactly?
Thanks in advance.Any help is appreciated.
Best Regards,
xiean
_______________________________________________
openflow-discuss mailing list
openflow-discuss@lists.stanford.edu
https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
