Hi Adria, If the Mikrotik is still supported, you can try and install the Openflow package directly from Mikrotik website as they released the package and they are supporting Openflow . I did the updated on my 450G and it worked fine- I am using floodlight as the controller but it should make a difference.
Regards Etienne On 24 April 2013 16:20, adria sole <adrias...@gmail.com> wrote: > Hi everyone, I am configuring a mikrotik 750 GL router with openwrt (svn:// > svn.openwrt.org/openwrt/trunk/) and putting after that the package > openflow (git://gitosis.stanford.edu/openflow-openwrt). > > When I do in openwrt (telnet/ssh) console: /etc/init.d/openflow start > > I get an error because of my config, do you know what is the mikrotik > router configuration for: > - /etc/config/network > - /etc/config/openflow > > I have seen there are 2 configurations in: > http://www.openflow.org/wk/index.php/Pantou_:_OpenFlow_1.0_for_OpenWRT > > but they are only for: > LinkSys WRT54GL and TP-LINK WR1043ND, what about mikrotik? > > Thank you very much in advance, > > > I have seen in wireshark (traffic sniffer) openfow dialog with my NOX > controller, but my router doesn't reply to the "Set Config" message, but > yes to the others, but because of that it resets the connection and starts > another time with: Hello/Hello, Set Config/No answer, Echo Request/Reply, > Reset, Hello/H...(etc). > > Error: > *root@OpenWrt:/# /etc/init.d/openflow start > eth0.1,eth0.2,eth0.3,eth0.4 > Configuring OpenFlow switch for out-of-band control > Jan 01 00:10:52|00001|datapath|ERR|eth0.2 device has assigned IPv6 address > fe80::d6ca:6dff:fe64:a6a9 > Jan 01 00:10:52|00002|netdev|ERR|ioctl(SIOCGIFINDEX) on eth0.3 device > failed: No such device > ofdatapath: failed to add port eth0.3 (No such device) > No need for further configuration for out-of-band control > Jan 01 00:10:55|00001|vlog|INFO|opened log file /var/log/ofprotocol.log > root@OpenWrt:/# Jan 01 00:10:55|00002|secchan|INFO|OpenFlow reference > implementation version 1.0.0 > Jan 01 00:10:55|00003|secchan|INFO|OpenFlow protocol version 0x01 > Jan 01 00:10:55|00004|secchan|WARN|new management connection will receive > asynchronous messages > Jan 01 00:10:55|00005|rconn|INFO|unix:/var/run/dp0.sock: connecting... > Jan 01 00:10:55|00006|vconn_unix|ERR|/tmp/vconn-unix.1069.0: connection to > /var/run/dp0.sock failed: No such file or directory* > > > _______________________________________________ > openflow-discuss mailing list > openflow-discuss@lists.stanford.edu > https://mailman.stanford.edu/mailman/listinfo/openflow-discuss > > -- Thanks and Regards Etienne Mula
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
