i got it fixed but dont know the logic yet, i assigned ip address to each vlan after which the error "unknown device eth0.1" error has disappeared, i added static rules via dpctl and both of the hosts started to ping, i assigned ip to every vlan from the same subnet i wonder how it accepted IPs from same subnet for all vlans.
it isnt invter vlanrouting wat is the logic. thank you, Shabbir. On Sun, May 5, 2013 at 12:56 AM, Shabbir Ahmed <shabbir1...@gmail.com>wrote: > i have found one thing if i assign an ip addres to eth0.1, it accept > eth0.1 n starts complaing abt eth0.2 > > > On Sat, May 4, 2013 at 5:31 AM, Jonathan Lim <jfli...@gmail.com> wrote: > >> Hi all, >> >> I'm using Pantou with OpenWRT on a TP-Link TL-WR1043ND. >> I ran into a problem when I omitted the line "option enable_learning 0" >> from the network >> configuration file. With a simple topology like >> host1-----OFswitch1------OFswitch2------host2, >> a ping from host 1 to host 2, resulted in lost ARPs. >> >> I've tried looking for an explanation for what enabled_learning is and >> how it >> affects the process, but I wasn't able to find information on that. >> >> Can someone help explain what the option 'enable_learning' means? >> >> Thanks, >> Jonathan >> >> >> TP-Link TL-WR1043ND >> >> _______________________________________________ >> openflow-discuss mailing list >> openflow-discuss@lists.stanford.edu >> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss >> >> >
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
