Alison, Thanks for the tip about /etc/config/network. I will look into it.
pichuan's feed is at https://github.com/pichuang/openvwrt. He recommended that people to switch to the openvswitch package in trunk. I don't know what hardware version gwlim's patches target. I can find out. I'm not giving up on compiling just yet. I received binaries from a list member. If I can get OF to work, I will put them on S3 and post the links to this list with his permission. Jeff L. On Tue, Nov 11, 2014 at 2:05 PM, Alison Chan <chan7...@kettering.edu> wrote: > Hey Jeff, > I've successfully gotten the 1043 version 1.x working with OVS. I've > never worked with the 1043 2.x, but a quick look at the ToH page on > the openwrt wiki says that the 2.x has a different switch IC. Look at > /etc/config/network; you probably have to change something related to > the switch name and/or how you configure it. > Can you post a link to pichuan's feed? I'm not familiar with it nor > can I find anything by Googling. > Also, are gwlim's Barrier Breaker patches for the 1.x or 2.x version? > The readme file doesn't specify which. > I hope this helps! Share your configs/images with the list if you get > it working. > > Cheers, > Alison > > 2014-11-10 19:55 GMT-05:00 Jeff Loughridge <je...@brooksconsulting-llc.com>: >> I have hardware version 2.1 of the TL-WR1043nd. In my research on how >> to get OVS on the device for Openflow testing, I've found a lot of >> great material that applies to 1.x versions of the hardware. I'm >> having terrible luck trying to compile and load an Openwrt image with >> the kernel module and userspace package. Using trunk and the Openwrt >> official feed version of OVS, the build succeeds; however, I end up >> with a router that is unreachable with ping. I tried adding pichuan's >> feed to gwlim's patched version of barrier breaker >> (https://github.com/gwlim/wr1043nd-barrier-breaker-patch) but the >> build fails with an error documented in the issues list for pichuan's >> project. >> >> Has anyone had success getting OVS on the TL-WR1043nd v2.1? I'd >> greatly appreciate any notes on the build process or a binary. >> >> Jeff L. >> _______________________________________________ >> openflow-discuss mailing list >> openflow-discuss@lists.stanford.edu >> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss > > > > -- > Alison Chan > Kettering University > chan7...@kettering.edu > +1 909 278 7753 _______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
