Hello, I'm trying to set up a gnugk box as a H323 proxy for my company. My setup : * A MCU MGC100+ polycom, on a private dedicated network (8.8.0.0/16) - address of the H323 card 8.8.0.3 * A gatekeeper SE200 polycom on the same network, address 8.8.0.5 I have several endpoint on differents sites on the network 8.8.0.0/16, which registers to the SE200. My purpose is to allow endpoints on the Internet to register to the gatekeeper and use the MCU, without opening all ports on the router. So here is what I'm trying :
1. Put a server with 2 NIC : one on the private network (8.8.0.100) and
one on the Internet (public IP).
2. Install GNUGK on this server
3. Make GNUGK act as a proxy
1. register GNUGK as a gateway on the SE200, with the prefix 101
2. forward RRQ requests of endpoints on the public network through
GNUGK to the SE200, adding a prefix (eg. 101) to the E164 number
3. make all the trafic (signal+data) of public endpoints go through the
proxy to the SE200/MCU/Endpoints on 8.8.0.0/16 network
I'm actually stuck in making GNUGK register to the SE200 : It replies to my
GRQ with a GRJ (see below for SE200 log file)
============================ <04:10:08 13:19:11>
============================
GRQ Received
'requestSeqNum' 2
'protocolIdentifier' 6 '00 08 91 4A 00 02 '
'rasAddress' 11343
'ipAddress' -111
'ip' 4 '8.8.0.100'
'port' 1719
'endpointType' -111
'gatekeeper' -111
'mc' 0
'undefinedNode' 0
'authenticationCapability' 2
'1' 15218
'pwdHash' 0
'2' 5234
'authenticationBES' 15442
'radius' 0
'algorithmOIDs' 2
'1' 8 '2A 86 48 86 F7 0D 02 05 '
'2' 10 '2A 86 48 86 F7 0C 0A 01 02 01 '
'supportsAltGK' 0
**Error**: Can't read EndPoint type: ERROR(-1067450213) 'The registered
terminal type is invalid.'
My GNUGK config file :
[Gatekeeper::Main]
Fortytwo=42
Name=GNUGK
[RoutedMode]
GKRouted=1
H245Routed=1
RemoveH245AddressOnTunneling=1
AcceptNeighborsCalls=1
AcceptUnregisteredCalls=0
SupportNATedEndpoints=1
DropCallsByReleaseComplete=1
CallSignalPort=1721
TranslateFacility=1
[Proxy]
Enable=1
[Endpoint]
Gatekeeper=8.8.0.5
Type=Gateway
Vendor=Generic
H323ID=GNUGK
E164=3030
Prefix=101
RRQRetryInterval=10
[RasSrv::GWPrefixes]
[RasSrv::RRQFeatures]
AcceptEndpointIdentifier=1
[RasSrv::ARQFeatures]
ArjReasonRouteCallToSCN=0
ArjReasonRouteCallToGatekeeper=1
CallUnregisteredEndpoints=1
RemoveTrailingChar=#
RoundRobinGateways=1
[RoutingPolicy]
default=parent
[RasSrv::RRQAuth]
default=confirm
[GkStatus::Auth]
rule=allow
[RasSrv::RewriteE164]
[RasSrv::Neighbors]
GK1=8.8.0.5;*
[RasSrv::LRQFeatures]
[Neighbor::GK1]
Host=8.8.0.5
SendPrefixes=*
ForwardHopCount=1
ForwardLRQ=always
ForwardResponse=1
[RasSrv::PermanentEndpoints]
[Gatekeeper::Auth]
default=allow
[CallTable]
[H225toQ931]
[Gatekeeper::Acct]
[NATedEndpoints]
[CTI::Agents]
VirtualQueueAliases=CC
RequestTimeout=10
Could you tell me :
* If what I've planned is a working solution for my purposes
* Why GNUGK can't register on the SE200
Thanks a lot
--
Cordialement,
Pierre BARDOU
CSIM - Bureau 012
Midi Pyrénées Informatique Hospitalière
12 rue Michel Labrousse
BP93668
F-31036 Toulouse CEDEX 1
Tél : 05 67 31 90 84
Fax : 05 34 61 51 00
Mail : [EMAIL PROTECTED]
BEGIN:VCARD VERSION:2.1 N:Bardou;Pierre FN:BARDOU Pierre ADR;WORK:;B011 LABEL;WORK:B011 EMAIL;PREF;INTERNET:[EMAIL PROTECTED] REV:20070806T072621Z END:VCARD
smime.p7s
Description: S/MIME cryptographic signature
------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________________ Posting: mailto:[email protected] Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
