I'm trying to get an understanding of how these two interact. I thought I
knew, but based on what's working and what's not, maybe I don't!
I have GnuGK and Codian 3241's in my network. The Codian is also a gatekeeper.
I would like to configure a network where hosts register with their local
gatekeeper with their full e.164 so that all locations can have a single
"flat" numbering space and a single directory. (011 in the U.S. vs. 00 in
Europe vs. 0011 in Australia, etc makes things complicated).
But I'd also like to use TEHO. I'm trying to get calls that are dialed in
the U.S. that are destined for Dubai to exit out from London. (May not be
the most optimal ISDN route, but this is just for testing.)
[RoutingPolicy]
default=explicit,internal,neighbor,catchall,enum,srv,dns
; London Polycom units register as 4420123456789
[Neighbor::lon]
GatekeeperIdentifier=lon
Host=10.244.57.5
SendPrefixes=44
AcceptPrefixes=*
ForwardLRQ=depends
[Neighbor::phi]
GatekeeperIdentifier=phi
host=10.244.4.5
SendPrefixes=33,1215
AcceptPrefixes=*
ForwardLRQ=depends
[RasSrv::PermanentEndpoints]
10.244.57.5=london
[RasSrv::GWPrefixes]
london=971
I thought that what should happen is that because GW prefix "971" is
configured for London, if I dial 971412345678 then the call should go to
London, where I have a IP to ISDN dial plan that says "if the call starts
with "971", then prepend "00" and send it to the PRI"
However, what's happening is that a LRQ is being made and sent to the
London Codian, which sends back a LRJ (because there aren't any units in
London registered that are 971412345678.)
2009/12/08 13:00:40.236 2 Neighbor.cxx(892) NB 1 LRQ(s) sent
2009/12/08 13:00:40.349 4 RasSrv.cxx(216) RAS Receiving
on 10.23.10.222:1719(U)
2009/12/08 13:00:40.349 2 RasSrv.cxx(175) RAS Read from
10.244.57.5:1719
2009/12/08 13:00:40.349 3 RasSrv.cxx(224) RAS
locationReject {
requestSeqNum = 3
rejectReason = requestDenied <<null>>
}
2009/12/08 13:00:40.349 2 RasSrv.cxx(1379) RAS Trapped LRJ
2009/12/08 13:00:40.349 5 Neighbor.cxx(939) NB Received
LRJ message matched pending LRQ for neighbor lon:10.244.57.5
2009/12/08 13:00:40.349 5 Neighbor.cxx(974) NB LRQ
rejected for neighbor lon:10.244.57.5
2009/12/08 13:00:40.349 5 Routing.h(177) ROUTING Checking
policy CatchAllPolicy for the request ARQ 40509
And then my CatchAll triggers, so the call gets sent to that location,
which isn't what I want.
What am I doing wrong?
------------------------------------------------------------------------------
Return on Information:
Google Enterprise Search pays you back
Get the facts.
http://p.sf.net/sfu/google-dev2dev
_______________________________________________________
Posting: mailto:[email protected]
Archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
