Hi.
I use gnugk2.2.8 and tried to do gateway failover.
The call hits the first GW and when failing with (34-no channels) no retrying
happens even though ActivateFailover=1.
The gateways are configured as permenant endpoints and do not register to
gnugk. (can this cause the failure?)
I can see in logs that the 3 gws are picked and selected the correct priorities
2010/09/08 09:01:15.012 2 RasTbl.cxx(1331) RASTBL Gateway
2495_endp matched by prefix 5781#, priority: 1
2010/09/08 09:01:15.013 2 RasTbl.cxx(1331) RASTBL Gateway
2496_endp matched by prefix 5781#, priority: 3
2010/09/08 09:01:15.013 2 RasTbl.cxx(1331) RASTBL Gateway
2538_endp matched by prefix 5781#, priority: 2
Can anyone guide me to find the reason why it does not failover.
[RoutedMode]
GKRouted=1
H245Routed=1
DropCallsByReleaseComplete=1
SendReleaseCompleteOnDRQ=1
ForwardOnFacility=0
Q931PortRange=20000-20999
H245PortRange=30000-30999
ActivateFailover=1
FailoverCauses=1-15,21-127
Thanks in advance
Manjula Hettiarachchi
------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:
Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_______________________________________________________
Posting: mailto:[email protected]
Archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
