Hi, is GnuGK also able to "collect" streams and signaling from Non-H.460-endpoints in the LAN and proxy this into a H.460 call towards the VCS?
Best, Florian. On 04.02.2013, at 16:49, Jan Willamowius <[email protected]> wrote: > Hi, > > all calls using H.460.17, .18 or .19 are automatically put into proxy > mode (if you gatekeeper is at least routing signalling, but yours is). > > The switch to force all calls into proxy mode and override all other > settings is ProxyAlways=1, which you already have in you config. > > Regards, > Jan > > Florian von Kurnatowski wrote: >> Hi, >> >> I have a VCS Expressway on another site of our corporate network as an entry >> point for video infrastructure. Between my LAN and this device, there is a >> firewall with a static 1:1 NAT. >> >> I'd like to run a GnuGK instance inside my internal network with endpoints >> registered to it. I would like those endpoints not to know anything about >> the network setup. I'd also like to keep GnuGK behind my internal firewall >> for security reasons. >> >> I would have thought that the following should do the trick. I would have >> hoped that GnuGK would redirect calls from internal endpoint 192.168.77.129 >> to itself, due to the "InternalNetwork" and "ProxyAlways" setting. It would >> connect to the VCS Expressway at 10.0.1.1. When a call is made from >> internal, it would tell the endpoint to send RTP data to GnuGK, then create >> a H460.18/H460.19/RTP-Multiplex client connection and proxy the data. >> >> Now, when I run this, calls to numbers registered with the VCS get >> connected, however no video ever goes through. Looking at network traces on >> GnuGK, it seems that only call signaling is routed, and further connections >> are made directly from the endpoint to the VCS (which does not work due to >> the network situation). >> >> Is there any way to FORCE GnuGK to Proxy communications always, irrespective >> of number of network interfaces, etc.? >> >> I am running gnugk-3.0 >> >> Any ideas? >> >> Thanks, best, >> Florian. >> >> >> >> [RoutedMode] >> GKRouted=1 >> H245Routed=0 >> CallSignalPort=1720 >> CallSignalHandlerNumber=4 >> AcceptNeighborsCalls=0 >> AcceptUnregisteredCalls=0 >> RemoveH245AddressOnTunneling=1 >> RemoveCallOnDRQ=0 >> DropCallsByReleaseComplete=1 >> SendReleaseCompleteOnDRQ=1 >> SupportNATedEndpoints=1 >> ForwardOnFacility=1 >> EnableH46018=1 >> >> [Proxy] >> Enable=1 >> InternalNetwork=192.168.77.0/24 >> ProxyAlways=1 >> ProxyForNAT=1 >> RTPMultiplexing=1 >> >> [RasSrv::Neighbors] >> VCSServer=GnuGk >> >> [Neighbor::VCSServer] >> Host=10.0.1.1:6002 >> SendPrefixes=* >> AcceptPrefixes=* >> H46018Client=1 >> H46018Server=0 >> SendAuthUser=test >> SendPassword=test > > -- > Jan Willamowius, [email protected], http://www.gnugk.org/ > > ------------------------------------------------------------------------------ > Everyone hates slow websites. So do we. > Make your web apps faster with AppDynamics > Download AppDynamics Lite for free today: > http://p.sf.net/sfu/appdyn_d2d_jan > _______________________________________________________ > > Posting: mailto:[email protected] > Archive: > http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users > Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users > Homepage: http://www.gnugk.org/ ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_jan _______________________________________________________ Posting: mailto:[email protected] Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
