Hi Jan and All,
I've been struggling for the last months to fine tune our GnuGK but
couldn't till now achieve what I would like, mainly because of my lack of
knowledge about this stuff, also it seems my age is getting in the way
(it's getting harder to embrace all the stuff I need to take care) and
available time for this project. Believe me, I've read the manual and
searched thoroughly in the web.
Sorry for these words, let's get to the point:
I manage a network with 5 locations, 3 of them have each one 1 endpoint and
the other 2 have each one 2 endpoints. All of the locations have direct
Internet access and direct communication between (VPN or MPLS) and by
design and lack of public IPs, all of the endpoints and behind a firewall,
thus the need to have a gatekeeper so that we can be reached from the
outside.
Till now I've setup one GnuGK mainly based on the NAT.INI and with some
more tweaks that people advised, also I've tried a neighbor setup with one
GK at each location (and I've experienced some problems) but this kind of
setup didn't seemed right to me.
What I would like: that each location could receive external calls (so not
dependent from present GK), could do external calls (mainly what we have
been asked is by IP or E.164@IP) and of course dial each other in the
internal network.
Thus this applies for a all neighbor setup?
Or perhaps, just an independent GK at each location (dialing internally by
E.164@GK_IP)?
Maybe even, just one GK and forget the rest?
Hope to ear from your experience and skills.
Thanks in advance.
Regards,
Joao
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________________
Posting: mailto:[email protected]
Archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
