Hi,
I just change CallSignalPort back to 1721(1721 is its default value, but
normally we set it as 1720 so when terminal dial GnuGK we don't need to
specify the prot 1721), now terminal-B can call terminal-A(NATed) fine as
the following:
I saw after terminal-A(NATed) sent facility message to GnuGk's port-1721,
GnuGK sent back setup message
could you tell me why there is no setup message sent back from GnuGK if I
set CallSignalPort as 1720 in the gatekeeper.ini? if I still want to use
1720 as CallSignalPort how to do that Thanks!
Regards,
Bo
On Thu, Apr 2, 2015 at 4:20 PM, Bo Xu <[email protected]> wrote:
> Hi,
>
> I have a GnuGK with H.460.18 enabled, and terminal-A and terminal-B all
> register to that GnuGK, and terminal-A is behind NAT.
>
> when terminal-A(NATed) calls terminal-B everything works fine, but when
> terminal-B calls terminal-A(NATed), from the wireshark in terminal-A, I saw:
> GnuGK sent SCI to terminal-A(NATed)'s 1719-port
> terminal-A(NATed) sent SCR to GnuGK's 1719-port
> then terminal-A(NATed) sent facility to GnuGK's 1720-port(I set GnuGK use
> 1720 as CallSignalPort)
>
> but after that, GnuGK didn't sent Setup messge back to terminal-A(NATed)
> as mentioned here:
> http://www.gnugk.org/nat-traversal.html
>
> I guess the facility massage terminal-A(NATed) sent to GnuGK might not be
> correct so GnuGK refuse to sent Setup back, could you give me a sample of
> the correct facility messge? is there other issue in what I did in the
> above? it is right for terminal-A(NATed) sent facility-message to GnuGK's
> 1720-port? Thanks!
>
> Regards,
> Bo Xu
>
>
>
>
------------------------------------------------------------------------------
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/
_______________________________________________________
Posting: mailto:[email protected]
Archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
