When I get back to a computer I'll post what I did, maybe that will help. Essentially I want our registered polycom units to call an unregistered device at another location/company. The catch is to do it via a 3 digit number so I used e164 rewriting.
Eg: 999 == 1.2.3.4##1016 (The perm alias) 999 and 1016 both work. 998 is a room on a Polycom mcu at a different company, and so on.. ?? On Tue, Sep 13, 2016 at 2:46 PM Bo Xu <[email protected]> wrote: > > I also tested Polycom-HDX6000 and AVer-HVC110, they are same with > Polycom-PVX as the following: > they all can use GnuGK-IP##registered-Alias to call a registered-terminals > they cannot use GnuGK-IP##permanent-Alias to call an > unregistered-terminals (already set permanent-Alias for them in GnuGK) > > in our application we want to use the above "##"-syntax to call both > registered/unregistered terminals, could you tell me if it is possible? do > I need to set some parameters for that? or could you tell me which part of > the source code causes this difference of registered-Alias and > permanent-Alias? is that possible to do a little bit modify of the source > code so we can use "##"-syntax to call both registered/unregistered > terminals? Thanks! > > Regards, > Bo > > > > > > > On Tue, Sep 13, 2016 at 2:12 PM, Bo Xu <[email protected]> wrote: > >> >> sorry I forgot to introduce that the terminal I am using is >> Polycom-PVX(8.0.16), when I try to call GnuGK-IP##permanent-Alias, then >> wireshark shows the folowing: >> got admissionConfirm >> then terminal send out setup-message, in this setup-message, Called >> Party Number in Q.931 is the permanent-Alias, and this permanent-Alias is >> also in H.225's destinationAddress's dialledDigits >> the calll is not successful; if I change it to >> "GnuGK-IP##active-register-Alias", then the call is successful. >> >> do I need to set some parameters in gatekeeper.ini so I can call both >> register-Alias and permanent-Alias with "##"? Thanks! >> >> Regards, >> Bo >> >> >> >> >> >> >> On Tue, Sep 13, 2016 at 9:49 AM, Bo Xu <[email protected]> wrote: >> >>> Hi Sergey, >>> >>> Thanks for the info! yes alias@IP and IP##alias are implemented by >>> different vendors, my question is about how to use them in GnuGK for >>> permanent-Alias and registered-Alias, i.e: >>> >>> I can use "GnuGK-IP##registered-Alias" to call a terminal which is >>> registered to GnuGK >>> but I cannot use "GnuGK-IP##permanent-Alias" to call a terminal which is >>> not registered to GnuGK but I set a permanent-Alias for it (but I can use >>> permanent-Alias@GnuGK-IP to call it) >>> >>> because I want to use "GnuGK-IP##Alias" to call both registered-Alias >>> and permanent-Alias Thanks! >>> >>> Regards, >>> Bo >>> >>> >>> >>> >>> >>> Hi Bo! >>> >>> I think there is some misunderstanding: the "aaa@..." and "bbb##aaa" >>> notations are the same thing, implemented by different vendors. >>> >>> For example: to call "aaa" on "bbb" from Cisco codec, I should use >>> "aaa@..." form and to call the same device on the same gatekeeper I'm >>> using "bbb##aaa" form for Sony codecs. >>> >>> If you want I can attach my configuration. >>> >>> Kind regards, Sergey. >>> >>> Tune-IT Logo >>> http://www.tune-it.ru >>> tel: +7(812)3254440 >>> Sergey.Zhmylove@... >>> 12.09.2016 23:33, Bo Xu пишет: >>> > Hi Jan, >>> > >>> > I can call a permanent-Alias with the following "@" command: >>> > permanent-Alias@... >>> > >>> > also I can call a register-Alias(a terminal who registered to my >>> > GnuGK) with the following "##" command: >>> > GnuGKIP##registered-Alias >>> > >>> > but I cannot call permanent-Alias with the above "##" command, cold >>> > you tell me how I can call a permanent-Alias with "##" like >>> > "GnuGKIP##permanent-Alias"? Thanks! >>> > >>> > >>> > Regards, >>> > Bo >>> > >>> >>> >>> On Mon, Sep 12, 2016 at 4:33 PM, Bo Xu <[email protected]> wrote: >>> >>>> Hi Jan, >>>> >>>> I can call a permanent-Alias with the following "@" command: >>>> permanent-Alias@GnuGKIP >>>> >>>> also I can call a register-Alias(a terminal who registered to my GnuGK) >>>> with the following "##" command: >>>> GnuGKIP##registered-Alias >>>> >>>> but I cannot call permanent-Alias with the above "##" command, cold >>>> you tell me how I can call a permanent-Alias with "##" like >>>> "GnuGKIP##permanent-Alias"? Thanks! >>>> >>>> >>>> Regards, >>>> Bo >>>> >>>> >>>> >>>> On Wed, Aug 31, 2016 at 1:25 PM, Bo Xu <[email protected]> wrote: >>>> >>>>> Hi Jan, >>>>> >>>>> yes I added "[RasSrv::PermanentEndpoints]" you mentioned into my >>>>> gatekeeper.ini and it works fine now, Thanks a lot! >>>>> >>>>> Regards, >>>>> Bo >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Hi Bo, >>>>> >>>>> GnuGk calls those endpoints that don't actively register "permanent >>>>> endpoints": >>>>> >>>>> [RasSrv::PermanentEndpoints] >>>>> 10.1.11.116=8000 >>>>> >>>>> Regards, >>>>> Jan >>>>> >>>>> -- >>>>> Jan Willamowius, Founder of the GNU Gatekeeper Project >>>>> EMail : jan@... >>>>> Website: http://www.gnugk.org >>>>> Support: http://www.willamowius.com/gnugk-support.html >>>>> >>>>> Relaxed Communications GmbH >>>>> Frahmredder 91 >>>>> 22393 Hamburg >>>>> Geschäftsführer: Jan Willamowius >>>>> HRB 125261 (Amtsgericht Hamburg) >>>>> USt-IdNr: DE286003584 >>>>> >>>>> Bo Xu wrote: >>>>> > Hi, >>>>> > >>>>> > if I have a endpoint whose IP is 10.1.11.116, but it is not registered >>>>> > to >>>>> > my GnuGK, in this case, can I set the gatekeeper.ini so GnuGK can "map" >>>>> > that endpoint's IP(10.1.11.116) to an "number"(for example 8000), then >>>>> > later on when I want to call that endpoint I will call GnuGK like >>>>> > "GnuGKIP##8000"? >>>>> > >>>>> > can I do the above with GnuGK? or I must register that endpoint to GnuGK >>>>> > then after that I can call it with "GnuGKIP##Alias"? Thanks! >>>>> > >>>>> > Regards, >>>>> > Bo Xu >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>> >> > > ------------------------------------------------------------------------------ > _______________________________________________________ > > Posting: mailto:[email protected] > Archive: > http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users > Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users > Homepage: http://www.gnugk.org/
------------------------------------------------------------------------------
_______________________________________________________ Posting: mailto:[email protected] Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
