Nitin> On other hand, on my linux node, if I try to use 8001 Nitin> partition and configure IB interface with IP addr (same Nitin> time while ib0 is using 0xffff pkey), I get the following Nitin> error, you may want to investigate that....
I think this is probably an OpenSM issue (does OpenSM support multiple partitions?). On my fabric, running Topspin's embedded SM on a switch, I can do: # modprobe ib_ipoib # echo 0x8001 > /sys/class/net/ib0/create_child # ifconfig ib0.8001 up on both systems. On system #1 I have: # ifconfig ib0.8001 ib0.8001 Link encap:UNSPEC HWaddr 00-13-04-06-FE-80-00-00-00-00-00-00-00-00-00-00 inet6 addr: fe80::202:c901:7fc:c711/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:2044 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:128 RX bytes:0 (0.0 b) TX bytes:300 (300.0 b) and on system #2 I'm able to do: # ping6 -I ib0.8001 fe80::202:c901:7fc:c711 PING fe80::202:c901:7fc:c711(fe80::202:c901:7fc:c711) from fe80::202:c901:78c:e461 ib0.8001: 56 data bytes 64 bytes from fe80::202:c901:7fc:c711: icmp_seq=1 ttl=64 time=4.56 ms 64 bytes from fe80::202:c901:7fc:c711: icmp_seq=2 ttl=64 time=0.077 ms 64 bytes from fe80::202:c901:7fc:c711: icmp_seq=3 ttl=64 time=0.065 ms - R. _______________________________________________ openib-general mailing list openib-general@openib.org http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general