Hi, I wanted to run netpipe and basics aren't working. I haven't tried the SVN tree in over a month. It could have been broken for ia64 for a while. Sorry for lagging on that...
I'm running 2.6.11 kernel with TOB svn bits and building the IB modules "in tree". Just replaced the drivers/infiniband with the one from SVN. Both systems are connected to a TS-90 switch (12 port?) which implements it own SM. Does this need a firmware upgrade maybe? iowa:/usr/src/linux-2.6# cat /sys/class/infiniband/mthca0/ports/*/state 1: DOWN 2: INIT iowa:/usr/src/linux-2.6# cat /sys/class/infiniband/mthca0/hw_rev a1 iowa:/usr/src/linux-2.6# cat /sys/class/infiniband/mthca0/fw_ver 3.3.2 ionize:~# cat /sys/class/infiniband/mthca0/ports/*/state 1: DOWN 2: INIT ionize:~# cat /sys/class/infiniband/mthca0/hw_rev a1 ionize:~# cat /sys/class/infiniband/mthca0/fw_ver 3.3.2 Modprobe output from ionize: ionize:~# modprobe ib_mthca ib_mthca: Mellanox InfiniBand HCA driver v0.06-pre (November 8, 2004) ib_mthca: Initializing Mellanox Technology MT23108 InfiniHost (0000:61:00.0) GSI 49 (level, low) -> CPU 0 (0x0000) vector 71 ACPI: PCI interrupt 0000:61:00.0[A] -> GSI 49 (level, low) -> IRQ 71 ionize:~# [ Probably want to roll the driver version and date again.] Any clues where I should be looking next? thanks, grant _______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
