On Fri, Oct 21, 2005 at 11:02:37AM -0400, Kanevsky, Arkady wrote: > How do you configure ipoib? > I used "ifconfig ib0 ip_address" which works fine. > But if I have several ports on an HCA how do I specify which port > ip_address should be associated with?
Nit: For linux, Christoph Hellwig (and others) have explained that the ip address is associated with the host, NOT any card. The route to the subnet is associated with the card. > Ditto if you have multiple cards. iowa:/usr/src/linux-2.6.13# lspci -vt -d 15b3: -+-[c0]---01.0-[c1]----00.0 Mellanox Technologies MT23108 InfiniHost +-[40]---01.0-[41]----00.0 Mellanox Technologies MT23108 InfiniHost \-[00]- iowa:/usr/src/linux-2.6.13# ifconfig -a | fgrep ib ib0 Link encap:UNSPEC HWaddr 00-00-04-04-FE-80-00-00-00-00-00-00-00-00-00-00 ib1 Link encap:UNSPEC HWaddr 00-00-04-05-FE-80-00-00-00-00-00-00-00-00-00-00 ib2 Link encap:UNSPEC HWaddr 00-00-04-04-FE-80-00-00-00-00-00-00-00-00-00-00 ib3 Link encap:UNSPEC HWaddr 00-00-04-05-FE-80-00-00-00-00-00-00-00-00-00-00 hth, grant _______________________________________________ openib-general mailing list openib-general@openib.org http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general