Scott Weitzenkamp (sweitzen) wrote:
OFED 1.0 rc3 on RHEL4 U3.  IPoIB is working, but I just noticed the HWaddr is 00-00-00-00-00-00-00-00-00-00-00-00-00-00-0, shouldn't this have the GID?
 
[EMAIL PROTECTED] ~]# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:13:72:50:B7:D1
          inet addr:172.29.238.49  Bcast:172.29.239.255  Mask:255.255.252.0
          inet6 addr: fe80::213:72ff:fe50:b7d1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:31232 errors:0 dropped:0 overruns:0 frame:0
          TX packets:13122 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:20539406 (19.5 MiB)  TX bytes:1415914 (1.3 MiB)
          Base address:0xdcc0 Memory:dfae0000-dfb00000
 
ib0       Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-0
          inet addr:192.168.2.49  Bcast:192.168.3.255  Mask:255.255.252.0
          inet6 addr: fe80::202:c902:21:51d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:2044  Metric:1
          RX packets:839425 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4384118 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:128
          RX bytes:44110930 (42.0 MiB)  TX bytes:8046551416 (7.4 GiB)
 
ib1       Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-0
          inet addr:192.168.4.49  Bcast:192.168.5.255  Mask:255.255.254.0
          inet6 addr: fe80::202:c902:21:51e/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:2044  Metric:1
          RX packets:364 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:128
          RX bytes:46824 (45.7 KiB)  TX bytes:408 (408.0 b)
 
Scott Weitzenkamp
SQA and Release Manager
Server Virtualization Business Unit
Cisco Systems
 

_______________________________________________ openfabrics-ewg mailing list [EMAIL PROTECTED] http://openib.org/mailman/listinfo/openfabrics-ewg
That's probably a bug in ifconfig dealing with such a long address.
Type ip address show and you'll see that the correct HW address is shown.



_______________________________________________
openib-general mailing list
openib-general@openib.org
http://openib.org/mailman/listinfo/openib-general

To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general

Reply via email to