The correct profile appears to be selected, and my configuration file is below - I've also munged out the e1000g0 IP addresses, as those are public facing IP addresses, and I'd rather not have them out there.
interface:e1000g1 type=uint64,1;class=uint64,1;parent=string,Automatic;enabled=boolean,true;ip -version=uint64,4,6;ipv4-addrsrc=uint64,0;ipv6-addrsrc=uint64,0,1; interface:e1000g0 type=uint64,1;class=uint64,1;parent=string,Automatic;enabled=boolean,true;ip v4-default-route=string,X.X.X.X;ipv4-addr=string,X.X.X.X/24;ipv4-addrsrc=uin t64,2;ipv6-addrsrc=uint64,0,1;ip-version=uint64,4,6; interface:ibp1 type=uint64,1;class=uint64,1;parent=string,Automatic;enabled=boolean,true;ip v4-default-route=string,10.0.1.254;ipv4-addr=string,10.0.1.79/24;ipv4-addrsr c=uint64,2;ipv6-addrsrc=uint64,0,1;ip-version=uint64,4,6; link:e1000g0 type=uint64,0;class=uint64,0;parent=string,Automatic;enabled=boolean,true;pr iority-group=uint64,1;activation-mode=uint64,4;priority-mode=uint64,1; link:e1000g1 type=uint64,0;class=uint64,0;parent=string,Automatic;enabled=boolean,true;ac tivation-mode=uint64,4;priority-group=uint64,1;priority-mode=uint64,1; link:ibp0 type=uint64,0;class=uint64,0;parent=string,Automatic;enabled=boolean,true;pr iority-group=uint64,1;activation-mode=uint64,4;priority-mode=uint64,1; link:ibp1 type=uint64,0;class=uint64,0;parent=string,Automatic;enabled=boolean,true;ac tivation-mode=uint64,4;priority-group=uint64,1;priority-mode=uint64,1; interface:ibp0 type=uint64,1;class=uint64,1;parent=string,Automatic;enabled=boolean,true;ip v4-default-route=string,10.0.1.254;ipv4-addr=string,10.0.1.56/24;ipv4-addrsr c=uint64,2;ip-version=uint64,4; -----Original Message----- From: Albert Lee [mailto:tr...@opensolaris.org] Sent: Sunday, October 17, 2010 9:15 PM To: Discussion list for OpenIndiana Subject: Re: [OpenIndiana-discuss] InfiniBand card not working> "Waiting for address" shouldn't show up for a manual configuration, make sure the correct profile is active by selecting "Network Profile" from the "Show:" listbox. Selecting a profile and clicking "Edit" will show the complete configuration for the profile, make sure it shows the interface as "Address (v4) <address/prefix>, (v6) DHCP Assigned, Autoconf" (or the reverse if you're using v6). The interface should also be grouped under "Always enable these connections:". If you've confirmed this, can you attach a copy of /etc/nwam/ncp-User.conf (where "User" is the name of the active profile in NWAM)? -Albert _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss