I reinstalled OpenIndiana on one of my machines. It had been in the first extended partition which was about 20GiB. After reinstalling it is closer to 8, but the extended partition size is the same. Is there any way to fix this?
I don't recall which OI device rpool was originally on c3...something. But it currently shows up as c3d0s0. Running format shows it as: c3d0 <Unknown-Unknown-0001 cyl 1042 alt 2 hd 255 sec 63> and partition print displays: Current partition table (original): Total disk cylinders available: 1042 + 2 (reserved cylinders) Part Tag Flag Cylinders Size Blocks 0 root wm 1 - 1041 7.97GB (1041/0/0) 16723665 1 unassigned wm 0 0 (0/0/0) 0 2 backup wu 0 - 1041 7.98GB (1042/0/0) 16739730 3 unassigned wm 0 0 (0/0/0) 0 4 unassigned wm 0 0 (0/0/0) 0 5 unassigned wm 0 0 (0/0/0) 0 6 unassigned wm 0 0 (0/0/0) 0 7 unassigned wm 0 0 (0/0/0) 0 8 boot wu 0 - 0 7.84MB (1/0/0) 16065 9 unassigned wm 0 0 (0/0/0) 0 but fdisk show the following information for the extended partitions: Number of cylinders in disk : 30401 Beginning cylinder of extended partition : 12814 Ending cylinder of extended partition : 30401 Part# StartCyl EndCyl Length % Part ID (Type) ===== ======== ======== ======= === ============== 5 12814 15425 2612 9 191 (Solaris2) 6 15425 29356 13932 46 191 (Solaris2) 7 29357 30401 1045 3 130 (Solaris) Any idea what's up? Thanks, -- Ron Parker _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
