Gabriele Bulfon wrote: > swap -l shows this: By the way, "swap" has the "-h" and "-k" flags, just like df.
Note also that you can list just the swap-mounted file systems with "df -F tmpfs -h". > swapfile dev swaplo blocks free > /dev/zvol/dsk/rpool/swap 179,2 8 1048568 634816 > but if I issue zfs list rpool/swap I get: > NAME USED AVAIL REFER MOUNTPOINT > rpool/swap 544M 11.9G 346M - > ...confused....what is the real swap space?? > I just would like to have swap space to be 2GB at least. > I don't think I tampered the installation, but just got this after the > original install on VirtualBox. > Is it Things get a little complicated because total swap includes memory and storage devices, but the "swap -l" output includes just the configured storage, and not memory. Try using "swap -s" (or "swap -sh") to see the actual space in use. You should see that the "available" space matches up with the available swap space seen by "df". For the ZFS swap volume, you'll want to look at the "volsize" parameter. That's what sets the actual disk area available for swap. It looks like the existing volume was set to 500MB. Try "zfs list -o name,volsize rpool/swap". To change the swap size, I'd do this: # swap -d /dev/zvol/dsk/rpool/swap # zfs volsize=2G rpool/swap # swap -a /dev/zvol/dsk/rpool/swap You could also create a new swap volume with the desired size, add it, and then remove the old one. -- James Carlson 42.703N 71.076W <carls...@workingcode.com> _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss