Hi Geoff, Geoff Simmons píše v po 13. 02. 2012 v 19:39 +0100: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > On 02/13/12 06:44 PM, Bryan N Iotti wrote: > > Maybe you could try disabling ACPI in BIOS if possible, or otherwise use > > the acpi-user-options=0x2 at boot. > > > > Read here for more info on disabling ACPI on boot: > > > > https://blogs.oracle.com/danasblog/entry/configuring_solaris_acpi_at_boot > > *Thank you* Bryan, acpi-user-options=0x2 got me past the crash and into > the installer. > > As the blog entry says, the value 0x2 disables ACPI, and there are other > choices that allow a kind of partial use of ACPI. I'm going ahead with > the installation now, and will investigate the other choices afterward > (and will share the results with the list). > > So, given these facts -- crash with the stack trace attached to my > previous mail, workaround by disabling ACPI -- I'm inclined to think > that this warrants a new bug report for Illumos, since I haven't found > anything similar at illumos.org. (Unless someone can point me to a known > issue.) >
the latest development bits (not integrated in OpenIndiana) contains updated ACPI support. It would be good to test it after successful installation. > > Thanks again, > Geoff Best regards, Milan _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss