I am trying to install OI 151a on an IBM x366. This machine has the Serveraid 8i SAS backplane, with a legacy IDE DVD rom drive.
The machine will boot the DVD, but then gives a stream of errors on pci@0,0/pci-ide@f/edi@0 time reset bus I've read about problems with IDE, that offered adding options to the command line that boots the kernel: -B atapi-cd-dma-enabled=0,atapi-other-dma-enabled=0 That didn't work. I also saw something about disabling multiprocessing with the -kd option, then entering "use_mp/W 0 :c" . That didn't work either. I tried booting from a USB dvd drive. Again, that boots, but after it loads the kernel from the DVD, I get an error that the drive disappeared. I tried making a bootable USB stick, but the x366 won't both from the USB for some reason. Are there any other suggestions I can try ? -Chris ========================================================== Chris Candreva -- ch...@westnet.com -- (914) 948-3162 WestNet Internet Services of Westchester http://www.westnet.com/ _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss
