Okay, this may not be the most elegant solution, but... My LSI HBA in IT mode presents all drives, SAS or SATA with a GUID, so I hacked up the script to remove the prtconf/sas2ircu serial number crap and just go by the guid. Now, I am seeing:
0:01:07 c2t5000C5000D3C80FFd0 ST9500430SS 500.0G Ready (RDY) rpool1: stripped 0:02:00 c2t5000C50041AB0C47d0 ST1000NM0001 1000.2G Ready (RDY) tank: mirror-0 0:02:03 c2t500A0751033D0AA2d0 M4-CT256M4SSD2 256.1G Ready (RDY) tank: cache 0:02:05 c2t50014EE25C240034d0 WDC WD10EALX-009 1000.2G Ready (RDY) tank: mirror-1 0:02:06 c2t50014EE206CED4ECd0 WDC WD10EALX-009 1000.2G Ready (RDY) tank: mirror-1 0:02:09 c2t50014EE2AEDF7498d0 WDC WD6400AAKS-0 640.1G Ready (RDY) tank: mirror-2 0:02:10 c2t50014EE204411A53d0 WDC WD6400AAKS-0 640.1G Ready (RDY) tank: mirror-2 0:02:11 c2t5000C50041BD3E87d0 ST1000NM0001 1000.2G Ready (RDY) tank: mirror-0 Drives : 8 Total Capacity : 6.0T which is now 100% correct, as far as I can see. Well, aside from the typo for rpool1 where it says 'stripped', I assume 'striped' was what was intended? _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
