On Sep 24, 2012, at 2:30 PM, Jaco Schoonen <j...@macuser.nl> wrote: > Dear all, > > After studying all the information about 4K-disks I figured out that to get > more space in my server I need to create a new pool, consisting of 4K-disks > and then moving everything from the old 512-byte pool to the new one. > So far, so good. Everything is connected and detected correctly. The 3TB > Seagate drives that I bought unfortunately lie about their physical sector > size, so I wanted to try the modified zpool as suggested in the wiki-page > http://wiki.openindiana.org/pages/viewpage.action?pageId=4883847 .
A fix has been implemented upstream. See the details at https://www.illumos.org/issues/2665 NB, VID/PID is matched by length, so "SEAGATE ST" will match all Seagate drives with product ID starting with "ST" sd-config-list = "SEAGATE ST", "physical-block-size:4096"; -- richard > It seems that the zpool-command that is linked to on that page is no longer > available. Is it available somewhere else or should I make the > zpool-modifications myself and build my own zpool? > > As this is a headless sever I would prefer a solution that does not involve > booting from zfsguru/freenas/whatever just to create the pool and then boot > back into openindiana as it would involve either getting the server to a > monitor, or a monitor to the server. Both of which are inconvenient (not > impossible, just inconvenient, so if that's the easiest solution, then that's > what I'll do…) > > I'm currently running 151_a5 in case it matters. > > Best regards, > > Jaco > > _______________________________________________ > OpenIndiana-discuss mailing list > OpenIndiana-discuss@openindiana.org > http://openindiana.org/mailman/listinfo/openindiana-discuss -- illumos Day & ZFS Day, Oct 1-2, 2012 San Fransisco www.zfsday.com richard.ell...@richardelling.com +1-760-896-4422 _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss
