As a midway point, vanity naming did not solve this. It only applies the name to the first interface in the datalink.conf file with this name, regardless of whether its device exists.
In particular, if the eth0 name is mapped onto rge0 first, then gani0, the system boots up with an unavailable eth0 interface and creates a new vanity naming gani0=gani0. If I reverse those two lines, things work. So, vanity names don't really help my case - not without an intermittent reboot, or some (SMF?) script to vanity-name the correct interface and continue with dladm setup of the system. That's something but not enough to satisfy me ;) 2012-10-20 20:08, Michael Stapleton wrote:
Bridging only supports physical NICs, not VNICs :-( Adding multiple VNICs to a physical NIC addresses this, but you are back to your original problem of changing physical NICs. I see scripting in your future...
Yes, my prophet! That might be possible ;)
NWAM might be used to trigger your scripts.
_______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
